Tag Archives: Own Design

the Perth dress/blouse

I’m beyond thrilled to announce the publication of our very first pattern!  The Perth dress/blouse is an unlined, loose-fitting little summer frock with a bit of a buttoned-up menswear vibe to it.  It’s kinda like a shirtdress, but kinda not.  A faux shirtdress.  The shirtdress to make when you’re not making a shirtdress.  Hehe, I joked in my own head while making it that it’s the shirtdress to make if you loathe buttonholes, since there are barely any at all in this one!  Also, I say “our”pattern, not because I’m using the royal “we”; but because I’ve gone into partnership with my daughter!  #whatdotheysayaboutfamilyandbusiness  but it’s OK, Cassie and I get along very well.  Plus she has mad magic Illustrator skills, which perfectly complements my complete lack thereof.   So we are the Carolyn & Cassie Pattern Co – this warms the cockles of my heart SO much I can’t even tell you!  I never dreamed we’d have some kind of venture together like this but now we do I think I can tick it off some sort of subconscious bucket list that I never knew I had.

So we have a brand new Etsy shop, CarolynandCassie; situated here…  Right now there’s only one thing in it, well TWO, since the pdf pattern and paper patterns are listed separately, but we harbour big dreams of having lots and LOTS of designs there in the future.  Or maybe that’s just the happy glow that comes with having it finally finished…  I’ve been basically living and breathing this thing for such a while, well ….  it’s out there now!

So this is what I’ve been working on for the past few months, not just pattern making but lots and lots of sewing too.  Apart from well over a dozen muslins, I’ve made four Perths in my quest for the perfect Perth.  I shall now proceed to bombard you with Perths, ahem…

1. My chocolate/tobacco version above;  this is not strictly a Perth but a “sort of” Perth dress, really.  This is my prototype Perth, a Perth in spirit since the final pattern is actually quite different everywhere in small ways …  you can see in my little movie below that it’s super bouffy, for one thing, and I tamed the boufff in that back with a big ol’ stern box pleat.  Down, boufff, down!

*LATER EDIT: instructions on how to alter the pattern to make this version are here…

I made this one back in April of last year! and because I’d already had the idea of making it into a pattern somehow it never got blogged here, even though I wore it a few times.

2.  My white one… a true Perth and currently my favourite mostly because of the perfect fabric.  It’s a white shirting cotton from Fabulous Fabrics, almost like a sateen, but a super fine one, crisp, lightweight and with the perfect amount of drape.  LOVE IT SO MUCH and actually I’m slightly regretting that I didn’t buy the whole roll  #addicted  In fact, this might be a good time to state what I think is the ideal fabric for this design… lightweight, thin fabrics that have some drape, yet still have just enough body for the tailored collar to work.  Basically, if you can imagine a mens’ business shirt made in it, then it’s probably just about perfect.  Sad sad times… I went back to the fabric store yesterday on another quest (long story and a pretty “big” one too in lifetime terms, I’ll relate it another time…)  and had a quick but hopeful look out for this perfect white fabric.. they’d sold it all!!  *sob*  #gottagrabitwhileitsthere

This one has slightly longer sleeves, that I eventually decided to shorten for the final version of the pattern. I shortened them back to the length of my original brown design because I thought the shorter sleeves looked a little more feminine and “perkier”; a nice offset to the overt masculinity of the buttoned-up, very formal looking collar.

3.  Further playing upon the menswear influence, I ran up a third version with a smart white collar, a lot like the shirts that I’ve made for my menfolk over the years.. these ones here are prime examples.  I used a lovely lemon-y yellow, lightweight pinstriped linen that I bought in Fratelli Bassetti Tessuti in Rome when we visited six years ago.  It was my Roman souvenir, and I’m fiiiiinally making something with it.  Well, it’s nothing if not well marinated!  I used a single black button at the throat as a small but definitive focal point on the dress.

Going back to my point about the perfect fabric, this linen has a little bit of body, maybe if I’m being super picky then I would say it has slightly too much body for the design to drape perfectly?  But it’s still pretty nice to wear, and cool!

4.  And finally; along the way I realised the design would make quite a nice blouse too, so we went about making this happen.  I like this length for a blouse slightly cropped and a little boxy.  For the blouse, I used a dark indigo chambray, leftovers from this dress actually! and a wooden button.

The chambray is a touch on the spongy side with some body to it so Im a teeny bit meh about it for this design really, but well… I’m completely ok with it for testing out, and I think it turned out a pretty cute wearable muslin.

Some of the technical deets…

So, want to hear the story behind the pattern?…. it’s ok if you don’t just stop reading now.  If you want to know to whole boring saga, carry on!  SO: nearly a year ago I made my brown dress, my prototype as it turned out.  I’d bought this lovely, slightly blotchy chocolate/tobacco linen from Tessuti’s in Melbourne during my trip there with Mum, Cassie and Tiffany, and drafted my own pattern, using my own block that I made years ago from my own measurements using the diagrams from Pattern Magic  (originally blogged about here), though I tacked on the collar and collar stand from my favourite Burda mens’ shirt pattern… but before you cry “plagiarist!”  I did NOT use that Burda collar and stand for my own Perth pattern!  I drafted the Perth ones myself from scratch, as I did all parts of the pattern.  I promise you, I’m very ethical and would never try to claim something as mine that is not…but more about the drafting process-ario later, I’m getting ahead of myself.

So, I made my brown dress.  I put quite a bit of thought into the closure, and worked out a solution  to get the look I wanted.  I liked it, but overall thought the silhouette was a little “booffy” and was definitely planning to streamline it a bit down the track.  In the meantime though I’d posted a progress picture on instagram, and there was a small number of polite comments suggesting an interest should I make a pattern for it.  The seed was planted…

I thought more and more about it.. I wasn’t daunted by drafting a pattern to fit “me”, but I was wondering how I could grade it.  At first I thought I’d get a qualified person to grade it for me.  I approached several people I know who have completed fashion design school at tech, none of whom had time.  But my friend J, fashion school graduate, and all-round awesomely inspiring lady, was extremely encouraging and assured me I could “easily do it” and it was “super easy”.  I secretly had doubts about this… but she piled my arms high with her pattern drafting books and sent me off.  I definitely felt challenged, and like I couldn’t possibly not do it now!  I was honour bound!  J would think I was an idiot!  Well… I am obviously, but no need for the world to know that, hehehe…. I spent the next few months studying the books J had given me, taking notes… the best by far was Winifred Aldrich’s Metric Pattern Cutting for Women’s Wear, I pretty much got everything from that.  There was also a vintage Burda book, I can’t remember its title at the moment but that one gave some very helpful grading tips too.

So I eventually graded my pattern!  I’d drawn it out by hand on large sheets of paper from a flip chart pad, with no seam allowances, graded it all by hand, and proceeded to trace and test each individual size myself before getting it scanned as a full sized pdf.  Yes, this is definitely NOT the most efficient way to go about it… I had early, highly romantic ideas about a hand-drawn pattern… aaah, so naive!  I quickly abandoned that fantasy!!  though hand-grading was an essential step in the process in the end, and I happily had complete confidence that my pattern “worked” in all the sizes… Then I started thinking about learning Illustrator.  I made a few low-grade investigations… and then Cassie got wind of what I was doing and reminded me that she basically spent her whole degree using Illustrator.  I was like, wow, would you teach me?  and she replied, oh Mum, I could make that pattern into a pdf for you in half a day…  I was, like OH My GOD!  My saviour!!!  At first, I was just going to pay her for her time… but as time went on, and we were working side by side on our computers, her on the pattern (it took a lot longer than half a day, btw!) me on the illustrations and instructions (also way longer than half a day!) and the idea of a partnership came up and it felt totally natural.  She was keen.  And I’m so very happy about it!  This means that if either of us come up with an idea then we have this outlet for it, and we have complementary skills.

Of course, it’s our first pattern, and the learning curve has been steep.  I reckon I did some things three or four times over, simply because the right way wasn’t immediately obvious.   Almost like, you have to kiss a lot of frogs before you get a prince.  Or maybe you can’t see the trees for the forest?  Making a pattern turned out to be something like that!

The next step was the all-important “real” testing phase, and it’s SUPER important!  I’m completely indebted to my delightful and awesomely helpful testers… who went through my amateurish instructions with a fine-tooth comb, thank goodness since I could barely see anything anymore for having re-written them a hundred times over.  Those that sent me pictures have made the most beautiful dresses which has been SUPER exciting.  I will do a separate post highlighting my lovely testers, soon, once everyone has got “final” pictures in to me.

Making the pattern a tangible thing: well at first I was just like, A4 is enough, yeah? Then one of my lovely testers SaSa of paisley pirouette mentioned a firm preference for A0, and I had a lightbulb moment that I should offer that too. Sounds so obvious in retrospect but truthfully I was kinda overwhelmed with it all at this point, so I really appreciated the reminder!  SaSa also kindly recommended to me a massive comment thread about people’s pattern preferences, over on sewbusylizzy, which I sat down and read in a night.  I got from this that sewing peeps were pretty evenly divided three-ways in their allegiance to and/or total avoidance of A4, A0 and/or paper patterns.  Meaning in fact, a pattern designer pretty much has to offer everything if she/he wants to a. please everyone, and b. be taken even half-way seriously!  So Cassie got to work on the A0 file and I went about making paper patterns happen.  I got my patterns printed at Officeworks, folded ’em all myself, and printed out and compiled my own instruction booklets, put together the pattern envelopes myself.  Goodness, that took an entire day all by itself, phew!  And then I set up our etsy shop…  aaaand sat on the edge of my seat waiting for my first sale!  The excitement when the first one popped in, wheeee!  What a rush!

So that’s it!  Want to try out my pattern?! We are the Carolyn & Cassie Pattern Co. our shop is CarolynandCassie on Etsy, and we have the Perth dress/blouse pdf pattern and the Perth dress/blouse paper pattern on offer.   I’ve also put a link to the shop up in my sidebar.  And I would love to see your Perths!  If you make one, then please either let me know in the comments, or tag us  @handmadebycarolyn and @shyshycassie on instagram, and use the hashtag #perthdress

Perth, and Perth! hehe

Am I thinking about my next pattern…?  well, of course!!

now for the embarrassing bit…

   

Details:

Dress/top: ours! the Carolyn & Cassie Pattern Co Perth pattern!!!  (duh)  white is a shirting cotton, yellow is lightweight linen, with a linen collar, brown is lightweight linen, blue top is a cotton chambray
White skirt: Vogue 1247, made from an old curtain, details here
Shoes: all made by me, actually! ha!  black clogs blogged here, caramel brown/ivory clogs here, white oxfords here

SaveSave

SaveSave

SaveSaveSaveSaveSaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

pinterestmail

call out for testers

Are you interested in making a little summer frock with a strong menswear influence?  If so then I would value your help and feedback!  I am currently accepting a limited number of applications for testing my new pattern, if you would like to give it a go and are able to provide feedback on both pattern and instructions within two weeks then please do fill out a form… I will get back to you very soon.

*Applications now closed… thank you so much for the overwhelming response!!!*

Perth dress tester form:

SaveSave

pinterestmail

an optimistic splash of colour and sunshine

Making this piñata, I mean… outfit was a random, didn’t really care about the outcome, “just because” bit of experimental fun… so of course it turned out perfect.  I love it.

So, we were going down to our beach house for the week between Christmas and New Year … and I have this teeny tiny dinky little sewing machine that I keep there and was thinking it was high time to give it a little workout.  Other than one other time I made a “real” garment, a pair of shorts, it’s been a strictly curtain-hemming and minor mending jobber.  btw, I gave those shorts to Cassie recently, she looks so much better in them!

This cheap little sewing kit that I bought from Coles a few years ago lives in the beach house too; it’s pretty much perfect…

So I packed some stuff to take down with me…. fabric, patterns, thread, zip and a button.  I even remembered white cotton for facings, and interfacing.  Who IS this efficient creature? I don’t even know.  Oh, and pompoms!!  Why pompoms??  WHY NOT POMPOMS, is more like the question!

I’d bought the fabric from the upholstery section in Spotlight last year; at the time I’d picked it up to cut so I could pay for my things at the cutting counter rather than at the all-inclusive checkout counter, which I had noticed on the way in was HUGE.  The things we do sometimes….  #stashenabler  Well played Spotlight, oh very well played…  I’m sure they sell a lot more fabric that way.  I’d also bought the burnt orange pompom trim a few years ago for something else that never got realised… I’d put them both in the “red” cubby hole in my new storage system and thought they looked quite nice together… so fortuitous!  My new system is proving itself already!

Clara says hi…  #soBIGnow

I chose the simplest and most featureless of patterns, because the super-loud colours plus pompoms is already a busy enough story on its own…  The skirt is basically Vogue 1247 stripped back; I lengthened it by about ?10cm? roughly… this pattern always needs lengthening.  Also, eliminated the pockets and horizontal seams, and flared out towards the hem a little more to be more A-line.  I think unlined summer skirts do need a little more flare to them, makes them cooler and breezier.  The top is yet another riff on New Look 6483, a great basic pattern for a simple shell with a whole lot of variations for the sleeve/armhole and neckline.  I’ve had it for years and used it loads of times.  This is view B, cropped a LOT.

Everything came from my stash; #stashbustingwin  and this button!  It’s been in my stash for so long, and there’s never been just the right project for it.  As soon as I spotted it again in my button bag, I knew its time had come!

My little holiday-house machine is so very un-serious, like using a toy sewing machine, you can’t help yourself but feel like you’re playing while you’re using it.  It’s so clunky and little.  It doesn’t even do buttonholes.  I actually tricked it into doing a sort of buttonhole, by careful zig-zagging, and manipulation of the stitch length and width, and careful realigning of the fabric to do each side.

I had so much fun making this crazy carefree little number!  I was on holiday, just having total fun with it, and so making it felt like a holiday too.  I think it even looks like a holiday!

  

Details:

Top; New Look 6483, cropped
Skirt; modified Vogue 1247
Clogs; designed and made by me, details here

my favourite bit… the pompoms!

SaveSaveSaveSave

SaveSave

SaveSave

SaveSave

pinterestmail

Christmas pressies; a sewing marathon

Tim and Kelly…

As usual, I made Christmas presents for my family… I started late October, so I was giving myself plenty of time, or so you’d think!  I’m a fairly efficient seamster, and I still only just finished a few days before Christmas!  it’s been a little intense and stressful, actually; every year I underestimate how busy the lead-up to Christmas is and how I just don’t get as much time to devote to sewing presents as I thought.  Plus, I’m a lot more finicky and particular – maybe excessively so?! about my sewing now too.  I think this is a good thing, but I have to accept that I’m taking longer to make things, and should start sooner!  Or maybe make less?

Anyway, it got done!  *phew

Listing everyting in the order I made it…

First thing to get made was a shirt for Tim… He has a job now where he has to look smart, so I decided to make a business shirt… I bought the really lovely deep maroon, mini-scale gingham cotton shirting from Tessuti’s in Melbourne, and used Burda 6874, my kinda go-to shirt pattern since I semi-retired Burda 7767.  d’you know I made that pattern 37 times… can you believe it?!  that tissue paper was wearing pretty thin in some places and in some other places I’d trimmed off the cutting lines altogether, woopsies!!

what sleeve placket…? of course I busted a gut matching those teeny little checks everywhere, took me two days before I could see straight again…

I made the buttondown version… see how the collar up there buttons down onto the shirt?  This is what qualifies it as a buttondown, folks!  I don’t wanna get all grumpy and pedantic here, being Christmas and all, but the number of times I’m reading about someone’s very lovely, but NOT A BUTTONDOWN shirt erroneously labeled as such and have to hold myself back, because we all hate a little lecture, right? I’m gonna stop right now otherwise I’m going to become that painful lecture-r.

this is the inside of the shirt… I’m pretty proud of my flat-felled seams… and I use the burrito method for the yoke so that’s all nicely enclosed too

All seams are flat-felled, using my own tutorials here and also this one here… yes you can flat-fell every single seam in a shirt! and it’s so much better and nicer… although I’m starting to realise that this is probably why what used to take me maybe two days to make a shirt…  now takes me double that time at the least! but anyway.  My guys appreciate the tailoring, so I’m happy that they’re happy.

Sam’s shirt…

I’m just SUPER happy with how my buttondown collars are looking nowadays!  It’s pretty hard to get that sitting just right and perfectly symmetrical; and I think after all the shirts I’ve made I’ve finally got it down…

Next up; I made a matching top for Kelly.  I’ve previously made matching tops for the two of them and noticed that they wear them together a lot! yes, it’s super cute…  I did a little bit of subtle inquiring as to whether matching clothes were still something they liked before I went there and got a positive response.  Alright then!

I had to be far less subtle about fitting it though!  I’d previously taken Kelly’s measurements for when I made a Kelly anorak for her… it’s impossible to do this without it being obvious! and made a block for her, using my Pattern Magic book to help me.  Yes, this is a pretty involved thing to do, requiring protractors and algebra and such-like! but honestly I’ve always found it to be a hugely worthwhile exercise when drafting new patterns.  Then I mocked up a quick plain bodice, and got her to try it on, and made the necessary changes.  In Kelly’s case, the block fitted but the armhole/bust dart had to modified considerably… the famous full-bust adjustment.  I regret now that I didn’t take any pictures of the mock-up bodice and the changes I made because it was a new learning curve for me that I wish I’d documented!

For Kelly’s top, I’d chosen the asymmetrical cowl top from Pattern Magic 2; the shape of the cowl is dictated by the shape of the facing.  It’s always a bit of a challenge to draft your own patterns, but well I love a challenge! and I knew the shape of this top would be super flattering for Kelly and suit her beautifully…  I cut the pieces on the bias and inserted a maroon invisible zip in the left side seam, so it zips down undone… however Kelly says she can squeeze into it without having to undo the zip which is cool.  I think the bias-cut is what gives it that little bit of stretch.

Next up! a business shirt for Sam! He has also started a new job which requires business dress everyday… I’d noticed a lot of young men wearing gingham shirts while we were in Melbourne… a good sign that gingham is super on-trend! so hot right now! which is basically why I bought gingham for both my boys in the first place.  It’s a bugger to pattern match though, even worse than stripes! gnnnnnnn  but oh well…

Again I used Burda 6874, flat felled seams throughout, same links as for Tim’s above… aaaaand so not much else to add.  Both Sam and Tim have been working out some lately, so I think I’m going to have to make some small adjustments to their shirts in the future.

Next up!  I made some little things for Cassie, she needs more work clothes so this was another practical gift really.  I made three things for her…. I just want to say here; it might seem unfair that I made one top plus TWO skirts for her, when compared to just one shirt for each of the boys, but it really does even out because the TIME I spent making these three little separates is actually the same as the time I spent on EACH of the boys’  shirts.  I know, crazy right?!  it’s all that tailoring bizzo that takes so much time…

Likewise, Kelly’s top needing a block made, plus the fitting muslin, plus drafting a pattern, also took about the same amount of time as making three tried and true things for Cassie!

Anyway; Cassie had already chosen this lovely crackle-y hand-painted cotton from the Fabric store in Melbourne while we were there, and I secretly bought the mustard gingham printed silk from Tessuti’s while she was looking elsewhere.  So the little top was a surprise!  The crackle print really is gorgeous, it is hand painted in Zambia and has that handmade naturalness to it…  LOVE this but pattern matching those hand-painted stripes was never going to happen!  of course they are all different widths and thicknesses which just adds to the charm of course.  I just shut down my inner-obsessive for a little while and did my best… at least I got the centre back seam to match!

The other little skirt is a cityscape print, maybe New York City by the looks of that Lady Liberty in there!  We’d seen the fabric in the upholstery section of Spotlight, so she’d known this one was coming too…

for both skirts I bound the lower hem seams using some leftover purple pin-striped linen, the leftovers from when I made this shirt for Craig a few Christmas’s ago.

I have also taken to binding the bottom edge of the zip and stitching it down to the seam allowances… often the bottom edge of a zip has a slightly scratchy bit which can be extreeeeeemely irritating when you’re wearing it… so I’ve taken to doing this whenever I made an unlined skirt with an invisible zip.  Such a small thing that greatly increases the comfort factor when wearing the skirt!!!

  

Oh! patterns!  I used the Inari tee pattern for the little top and Vogue 8363 for both of the skirts, and since I’ve made both of these patterns for her several times already they were super quick and easy to run up. For both skirts I added belt loops so she can cinch in the waistline a bit; in self-fabric for the Zambia striped one, and in black denim for the cityscape one.

Next up! a short-sleeved white shirt for Craig! also using Burda 6874 and a white cotton broadcloth from Spotlight, this was intended originally to be the same as this little shirt that I made for him a few years ago and which happens to be his most worn shirt … then just before making this I’d whipped up my little yellow/black&white lingerie set and had the gingham ribbon sitting out, and suddenly had this brainwave as to how I could use a bit more of it! I stitched the gingham ribbon carefully down the button line of the button placket, and used a little bit to trim the pocket.

To match this gingham detail, I lined both the collar and collar stand with some cotton gingham that I’ve had for aaaaages, and used black buttons to finish the shirt.  Note; IT’S A BUTTONDOWN SHIRT!  Also, of course it’s nowhere near a clone of the other white shirt any more but I still think he’ll wear it a lot…

Next up! a pullover/sweatshirt for Craig!  truth now… I was running out of time, and steam! and this fair near killed me!

Craig with a much much smaller Sam and Tim…

So, once upon a time, nearly twenty years ago, we went on a summertime camping trip down south and it was blooming’ freezing, our tent nearly blew away, we got rained on, hailed on and fair near froze to death!  In pure survival mode, Craig drove to the nearest town bought a red sweatshirt that he has since LOVED and worn about a million times, almost to bits since it’s getting reeeeeeally worn and threadbare now.  At some point he asked me to make a clone of the famous sweatshirt…

Of course it’s easy to clone a sweatshirt, but the challenge is in finding suitable fabric! I found this blue marled French terry in Spotlight, and while the colour is a teeny bit blah and the texture is not as nice as his original sweatshirt, it’s going to make a reasonable stop-gap until winter rolls around, the winter fabrics come into the shops, and hopefully I can find something nicer.  I busted a gut finishing off all the seam allowances off beautifully inside though… imitating the exceptionally beautiful finishes that were in the original.  For the pockets and bias binding I used some of the leftover navy/white gingham that I used for Sam’s shirt, above.  The pockets are French-seamed and the rest of the seams have an interesting amalgamation of HongKong bound AND flat-felled seams… not sure if my method is the same as in the original but I worked out a way to do it and took a few pictures along the way.

First, stitch the seams, then figure out which way you want the seams to be stitched down and apply bias binding to the topside of the seam allowance… ie. to stitch along the same stitching as previously you will be pinning/stitching along the UNDERNEATH,

OR alternatively you can save yourself a step here and stitch the bias binding on at the same time as you’re stitching the seam; your choice.

Press the garment seam allowances open, then press them to the side where they will be felled, with the bias binding on top.  From the other, right side, of the garment, pin through all layers.

With the right side facing up, topstitch the garment to the seam allowances plus binding, through all layers, just to the side of the garment seam…

view on the inside…

Keeping the bias binding free and clean, trim and grade the garment seam allowances…

Turn under and press the raw edge of the bias binding down so as to encase the seam allowances of the garment, pin in place.

With the bias binding facing up, and following the previous stitching as a stitching guide, topstitch the pressed edge of the bias binding down.  Since you’re using the previous stitching as a guide, the width of your double-topstitching will be nice and even from the outside.

Voila!  Such a nice neat finish!  at first I thought it might be overkill, but it is rather classy, if I say so myself; looks pretty good both inside and outside.  I will definitely be using this one again!

As seen above, I also applied bias binding all around the zip tape and stitched it down with double top-stitching the same way to match… this really does make a nice, neatly finished look when the zip is down.  Which it will be, most of the time.

And, last but not least!  I also made a few more little hardback notebooks… just fun little things, however I do know that the recipients do actually use notebooks regularly so I know they will be useful too!  I used mostly a mixture of leftover and old papers; from old scrapbooks, some with the children’s scribbles still on them!  I’m sentimental that way  😉 , various papers, musical paper, some pale coloured wrapping paper, writing stationery; just lots of different stuff.

The notebooks are covered variously with linen, velvet, printed cotton.  The one I made for Mum is covered with raw silk hessian.

So! Yes, it was quite a lot of stuff to make and I was working on it all like billy-o from touching down after Melbourne right up until I finished right on the wire only two days before Christmas…  I’ve been thinking about this… why am I taking longer to achieve less nowadays?  and I think it’s because I used to be happy and content with a slightly more unfinished approach… slapdash is maybe too strong a word? whereas now I am far more, possibly excessively? finicky and particular about perfect finishes on the insides.  I think I’m ok with this…  I feel like well-finished clothing is what I’m into right now.

However, to avoid the Christmas stress maybe I need to start making Christmas presents a LOT sooner!  Each year I start way ahead of time and think by doing so will relieve the stress, each year I get super stressed out and have at least one “I CANNOT DO THIIIIIIS!!” moment.  But I did.  And now for a break from deadlines!!

SaveSave

SaveSave

SaveSaveSaveSaveSaveSaveSaveSaveSaveSave

SaveSave

SaveSaveSaveSaveSaveSave

pinterestmail

navy blue mary janes (shoes)

 

I’ve made some new shoes!!  This is the first pair of shoes made on my new, semi-high-heeled lasts; that I bought … maybe six months ago…?  (blush) yes, it’s taken me quite a while to get onto it.  Can I just say… Steep.  Learning.  Curve.  That’s all.  Making these was quite a different kettle of fish to the fun and relatively easy little flats that I’ve been making up until now.  But anyway, they’re done.  And I know I’ve said this before, but I may be prouder of these than I’ve ever been of ANY other thing I’ve made before!!

You know the old saying? something about 10% inspiration, 90% perspiration?  YEP!!  Although this might be more like 99% perspiration…

Several times I almost gave up on these because I thought they were not going to work, and several times I thought I’d almost ruined them.  There are several bits that are definitely not perfect, a few scars from where I had, um, …issues… but I’m still pretty happy!

Confession time: I actually started recording YouTube videos to document the process of making these shoes, and basically gave up on that halfway because I truly lost heart a few times and felt like my shoes were never going to happen.  Likewise, I didn’t take many actual photos during the making of them either! the ones in this post here are basically all of them…  But I’m so glad I persisted in the end (minus the stress of filming myself) and have finally limped in to the finish line.  I’ll make another YouTube video, some other time, on some other shoes.

my friend R was cleaning out her wardrobe and gave me some old shoeboxes last week… I’m so glad I could put one to good use almost straight away!

 

So! the deets…

Materials: the material is a beige-coloured, upholstery suede, from a piece given to me by my friend A after they’d had some benches in their boat re-covered… I’ve used this same fabric to make two pairs of shoes previously… my white oxfords and my laced-at-the-heels shoes.  I spray-painted my pieces navy blue, using enamel spray paint (Bunnings) and also spray-painted two small, round-top, white plastic buttons from my stash…  the shoes are fully lined with navy blue suedette fabric from Spotlight.  For stitching both inside and outside the shoes I used Gutermann’s upholstery thread in navy blue (Spotlight).  The layers are glued together with PVA glue, and the heel counters and toe puffs are formed with stretch denim and PVA glue.  The soles are rubber sheeting (Bunnings); shanks are metal brackets from Bunnings, hammered to shape; foam insoles are just cut-to-size ones from the supermarket; heels are hand-carved pine (Bunnings)  I bought my 5.5cm heeled lasts from etsy store Tatyz

The biggest, albeit hidden difference between these and all the previous shoes I’ve made is the presence of a shank … basically a shank is piece or strip of something hard and inflexible, mostly metal; that provides arch support and helps the shoe maintain its shape.  I knew all along I’d have to put a shank in these, because of the defined sole curve… but racked my brains as to WHAT I could actually use.  I’d investigated buying purpose-made shanks, but there were two issues… firstly, how could I be sure the ones I was buying would have the right curve to suit my lasts? and secondly and really the biggest one, was that all of the sources I found had minimum orders of, like, 5000.  LOL!!!

I guess there’s probably a shoe-making supply store open to the public somewhere where you can actually buy them, but I couldn’t find it.  Anyway, in my meanderings through Bunnings looking for likely suspects I found these metal brackets, and thought I’d give them a whirl.  As it turned out, I think they’re going to do the job just perfectly!!

the yellow stuff is some thin foam which is just to pad out and level off the sole, offset the thickness of the shank

The brackets are very stiff and strong, and it took some crazy, Thor-like hammering to get them to curve just how I wanted them to, to fit snugly to the bottom of my lasts.  So I’m pretty confident they will maintain their shape very nicely, even when I’m wearing the shoes, and subjecting them to the pressures and strain of everyday walking.

I decided upon a hand-carved, wooden heel.  Ermahgerd, but these nearly killed me, not to mention my poor shoes… These ones gracing my shoes now are the second set of heels I made.  I actually fully carved another set, but when I loosely attached them to the bottom of my shoes to trial them I could instantly see they were too small and looked visually ridiculous to my eyes…  SO it was back to Bunnings to hunt for something else…  it’s actually pretty hard to find good-sized blocks of wood for sale, that are not planks.  The final heels were carved from a pair of furniture “feet”.  These are big fat square blocks of wood that you can screw to the bottom of your sofas or whatever… anyway, they were a good size enough for me to carve some nice, blocky heels.  I used our belt sander for all the carving.

rejected heels at right.  They were carved from a table leg.

The heels are glued to the bottom of the soles (contact adhesive, Bunnings, same stuff I use to glue the sole to the bottom of the shoes) and then nailed through from inside the shoe.  I drilled holes from inside the shoe, being very careful to avoid the shank! it would have destroyed the drill bit! Then, I swiped 2mm thick, 3cm long, shiny nails through a blob of PVA glue (in hope of giving them a bit of extra grip) and hammered them into the holes.

there are 9 nails per shoe… should be enough I think! I hope!

I’m making it sound all very straightforward… but this is the bit, yes, the very last step! where I seriously thought I’d destroyed my shoes. My first nail attempt was using a 3mm thick, 5cm long, galvanised nail, which in retrospect was a monstrous nail to choose.  IT WOULD NOT HAMMER ALL THE WAY IN.  Pulling that thing out did damage the back of that shoe quite a bit, which was pretty heartbreaking, but I certainly wasn’t tossing them in the bin after all I’d been through!  Explanation on how I patched it up later…

normally I cover the insole in the same fabric as the lining… in this case I thought the periwinkle/ purple colour of the foam looked quite nice just as it is…

Anyway, once I’d got the monster nail out, I had success with the shorter, sleeker nails.  The top edges of the back of one shoe were pretty stretched and dinged up from pulling out the nail, and I just judiciously applied new glue and a bit of new lining fabric to patch up what I could.  And I gave both shoes a new coat of navy blue paint… truth was they really did need freshening up, after the months I’d spent working on them, constantly handling them, and tossing them in a drawer in-between times, the initial paint job was already looking a tad shabby.  Also, in the process of making them I’d gone off my initial colour choice, thought it was a wee bit drab.  So I bought two tubes of acrylic paint (Spotlight) in ultramarine blue and black, and mixed up a shade that was still a deep navy but was a little more vibrant and rich.

Final thing was to mask the heels and apply a quick spray of fixative.

Well, the final final thing of course was to varnish the heels (3 coats of clear satin polyurethane varnish from Bunnings) and to glue a protective layer of rubber to the underneath of the heels.

Ta da!!  I’ve no doubt I will be wearing these with immense pride for years…. that is, until I make something better.  I’ve learnt so much!  On to the next pair!!

 

SaveSave

SaveSave

SaveSave

SaveSave

pinterestmail

magnolias

Originally I bought this lovely magnolia print fabric to make something else… but ended up making this random frock  instead.  Spring was coming…and I really wanted something romantic and floral.  I sorta couldn’t picture anything properly, there were false starts… then Mum, Cassie and I had planned another trip to Melbourne this year, to go to the Dior exhibition at the NGV and I became enamoured of something old-fashioned, feminine, of an easy-wearing, pfouffy skirt.  So this is me, realising that.  I feel a bit like an old-fashioned housemaid, like Cinders before the pumpkin, or an Arthur Rackham-illustrated Alice.

This is all good  🙂

I thought I would get a nice picture of my dress at the Dior exhibition… but do you think I did?!  nope! I wore it, but well, Mum, Cassie and I were so busy looking at all the delightful Dior, listening to our audio and ooh-ing and aah-ing so I didn’t even think about it!! however I did notice a few days later that my dress was serendipitously a lovely colour/design complement to the floor in the NGV.

You just have to picture it on there!

Fabric; a stretch cotton sateen from Spotlight.  I went to considerable trouble to make sure the magnolias are scattered randomly and unevenly across the dress with no discernible pattern repeats … even laying the pattern pieces down upside down sometimes so as to avoid too much same-ness.

Pattern; Vogue 1317, a Chado Ralph Rucci design.  I have made this pattern exactly once before, here.  I loved that dress and wore it a lot; but the tight underarm issue due to the unusual seaming with gusset and the cut-on, close-fitting sleeve arrangement, that I discussed in that post, turned out to be quite annoying after all.  You might love the style of a thing, but if it’s uncomfortable then there comes a time where you’re like; why am I wearing this?? … and at one point I had one of those kon-mari urges to do a whirlwind clean out.  I read a good tip somewhere… can’t remember where… that a good way to do a quick clean out of a closet or wardrobe that was stressing you out due to vague feelings of having Too Much Stuff was to walk up to it and just immediately and spontaneously pick out ten things to throw away,right then and there.  You’re not supposed to spend more than, say five or ten seconds thinking about each thing… but just a gut reaction; do I love this? or not really? Because honestly, you know in your heart the answer to that question already and not allowing yourself time to talk yourself out of it does make the process of jettisoning rubbish a lot easier.  Trust me, it does.

So, out it went.  In my opinion the importance of using a stretchy fabric for this pattern should be printed in large bold letters across the front of the envelope.  It’s absolutely fine in a stretch fabric.  Well, of course it is!  Everything’s fine in a stretch fabric!!

the ability to lift your arms up comfortably is always a plus

Mods:

1) I left off all the double topstitching for a clean stitch-less look, finishing off the hemline with bias-cut white voile… I also left off the giant birthday-present bow that ties in the middle of your tummy.  I thought about cutting it longer and wrapping and tying it at the back like I did with my first version, but really the print makes this dress pretty busy enough already, without a belt-y thing as another visual distraction.

2) I shifted the pockets out towards the side seams by about 4cm, just like I did with my first version…  you can just tell the pockets are situated way too close to the centre front, just by looking at that cover shot.

3) and most obviously; I wasn’t happy with the dress how it is here in its intended short version; in fact at this point I took a violent dislike to it and almost abandoned it completely.  A few weeks of despondency passed by, and I was thinking about the Dior exhibition coming up, which let me to think of the Dior shape, which in turn inspired me to add the long ruffle/frill around the bottom….  I used leftover fabric from which I cut random “doughnut segments” and “pieces of pie” shapes, joined them together to make a giant, sorta fluted doughnut… and attached this to a white cotton voile skirt lining

I felt a lot better about the dress after this.

So I’ve worn it several times now… hmmm there I go, wearing things before blogging them, again!! Oh, I also decided to permanently stitch the collar flaps down inside to make it a V-neck.  I just like this look better than the high slit front, in this particular fabric.  Not quite so prim and proper.

The good thing about wearing something before blogging it is that I can, at least report on how it feels out in the wild, so to speak.  I’ve worn it on the beach, to walk my dog, to do housework and the shopping… as well as in amongst the divine Dior.  And I’m happy to say that the delightfully feminine swishiness afforded to me by this dress indeed sparked much joy in my heart, rendering it safe from kon-mari-ing, at least for a while!

Details:

Dress; modified Vogue 1371, in stretch sateen
Shoes (above); made by me and my own design, details here

SaveSave

SaveSaveSaveSave

SaveSave

pinterestmail

suits me to a tee

So, a new year, a new Refashioners challengelast year we did jeans, this time the thing to be updated is A SUIT.

Most disappointingly, I could find no one in my family or circle of friends to donate a suit to the cause. 😉  Well of course not…  let’s see; these things are a) expensive and b) made to last a lifetime.  It takes a lot for a man to give up his suit. And let’s not forget to mention the biggie; c) suits are usually beautifully tailored things and the very thought of giving one to somebody who is just going to take the scissors to it is a pretty big ask.  I know I wouldn’t give one up either!!

before…

So I went along to the the opshop and bought one.  It was $22.  Even then, I still felt pretty bad about chopping it up, and found myself mentally apologising to the unknown tailor the whole time.  My suit is a Sax Altman: Sax Altman has been making high quality, traditionally tailored suits in Australia using fine Australian wool since 1977.

Just so you know, this is a pretty good innings by Australian standards… It’s actually pretty difficult to find suits in opshops here, men hang onto them forever.  Lots of orphaned sports jackets and some suit pants, but not many matching sets.  I initially honed in on this suit just because it wasn’t black! it is a deep charcoal-y/chocolate brown with subtle blue and grey pinstripes.

the fabric is pretty beautiful…

Once I got it home and had got a good look at it I could appreciate its quality; it’s beautifully made and let me tell you it was pretty darn hard to make that first snip… I’d decided already that I would make something that would honour the original tailoring, and keep as much of the important bits as I could, this one had it all; the interlined padded fronts with hand-padstitching, horsehair interlining, bias cut strips of organza everywhere on the inside to stabilise various areas, taped fronts, and tonnes of inner tape everywhere; sometimes bias cut organza, sometimes a sturdy cotton, sometimes strips cut from the selvedge… these were variously used as stay tape in different spots, hidden inside.  It was all pretty heavily and exquisitely engineered and one thing’s for sure; I could never produce something like this myself!!

What I did: I wanted for the jacket to be quite close-fitted to my shape, so I opened up the lining at the lower back hem and took in the suit jacket through ALL the seams here… the centre back seam, the back princess seams and the side seams, at the same time, I took in the jacket lining through the seams inside too..  I didn’t touch the front darted seams because they ran into the front pockets and altering them would have ruined the integrity of the pockets.  Oh, I’m pretty pleased that I managed to keep EVERY SINGLE POCKET of the original suit… I really didn’t want to sacrifice any, I thought if I absolutely had to I would…  but I managed to keep them all.  THE SANCTITY OF THE ALMIGHTY POCKET MUST BE UPHELD!!!  (kidding)

I removed the sleeves and trimmed several inches off the shoulders, and cut off the lower half of the legs to use for new kimono sleeves, binding the lower armhole with bias-cut wool harvested from a sleeve.

The leg hemline had a really nicely turned up cuff, which I liked, and kept for the new sleeve hem.  I love the new bracelet-length sleeves! if I did have to nit-pick, in an ideal world I think I would have preferred a wider sleeve but you know refashioning, sometimes you just gotta make it work with what you have!

I turned in and stitched a new front opening line for the jacket, making it a long, diagonal straight front coming to a point with a single button closure (above).  I cut so as to remove the lower two buttonholes, keeping the original upper button hole and repositioning the upper button over a bit to give the front more of a “wrapped” kimono-inspired look.

That’s the jacket!!

The new skirt nearly drove me mad…. men and women are not built the same (duh); we women want width for our hips and hemline, and a narrow waistline… men’s clothes are made to be the total opposite.  And also, the CUT! because of course the legs and the fly of men’s suit pants are cut differently against the grainline to how a skirt is cut, this makes it extremely difficult to transform them into a skirt!  Fortunately the trousers were big enough I had a bit of extra width to play with here….  first of all, I took off the waistband and unpicked nearly everything except for the side seams where the side hip pockets were attached.

I removed the old zip which had gotten a little rickety over the years, and installed a new black dress zip.  This entailed truing up the grain lines at centre front and creating a completely new fly and fly shield.

you can just see at the top; a strip of organza that was used to stabilise the waistline… I kept as much of these superb “hidden” structural details as I could, too

I wanted a flat-fronted look to the skirt, so made wide long darts at the front waistline to pull in the extra width there, these I topstitched down on the outside, continuing the topstitching down seamlessly to become stitched pin-tucks down the full length of the skirt front.  This is exactly where the pressed line was for the trousers.

The skirt front is straight, but those back trouser legs are cut so as to curve IN, just where you don’t want them to when cutting a skirt, so I’d cut a triangular godet from the jacket sleeves, taking in the sleeve cuff buttons/buttonholes and the original sleeve hem.  I was a little disappointed that these were fake button-cuffs and can’t be opened… but they still look pretty nice you know, you can’t win ’em all  😉

I inserted the godets in the lower skirt side seams along with a long inverted pleat so the skirt back kicks out over the godet.  I actually love this little detail.

I don’t even want to say how many pinnings and bastings it took me to get this silhouette that I wanted; a flatt-ish skirt front and a slightly flippy skirt back.   LOTS

Finishing up… shortened the waistband, reinstalled it stitched the belt tabs down again… oh and still managed to maintain that little coin pocket that sits right beneath the waistband… pretty proud of myself that I finagled that, hehe: and BAM! finally done!!  A fresh new womanly suit made from an old discarded men’s suit, albeit a rather nice one.  I’m very happy with the long-line jacket with slightly kimono-y vibes and a short, structured-yet-flirty skirt.  I feel like it’s very very me  🙂

And I still had a few leftovers from a sleeve… so I made a bandanna for Clara, and a new little zipped pouch to hold her poo-bags.  *

*it’s the law in Australia that if you are walking a dog, you MUST be carrying  little placky bags so you can pick up after your dog, there’s a hefty fine if you’re caught without them! I just used to tie them on to Sienna’s lead and then for blog pictures would try to hide them because they’re so ugly…   or take her off her lead for a bit… you can see them in an earlier picture here…  anyway I don’t know why I didn’t make a little bag like this aaaages ago!

I used an old zip and attached a jump ring and a little swivel clip so it can clip onto her lead.  The swivel clip was a leftover from when I made my winter boots… they’re not terribly robust so I plan to replace it with a mini carabina when I can get hold of one.

The only new things I used for this refashion were: thread, the zip in the skirt, and the zip, jump ring and swivel clip in Clara’s bag.  Not too bad!

Details:

Jacket and skirt; my own design, finagled from an old mens’ trouser suit
Bodysuit; the Nettie by Closet Case patterns, from paprika stretchy stuff, details here
Shoes: Misano, from Labels boutique

SaveSaveSaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

pinterestmail

cha-cha pink stooff

Hello!

Our recent holiday was a pretty multi-locationed one, covering a lot of ground and involving buses, trains, ferries, sea planes, also including a few long loooong waits in airports thanks to flights getting annoyingly delayed by fog, and two long looong ferry trips of a WHOLE day each.  And because I am the eternal optimist about Getting Stuff Done, even whilst away, I had tossed into my luggage some sock wool and needles, just in case.  And thank goodness I did ‘cos consequently I finished two new projects. As they say in Canada, O yaaa! #AirFistPunch

Item ONE! … or should that be items one and two?

A pair of sockeroonies… photographed against the majetic forests of Hanson Island in beautiful British Columbia, Canada…   I’m poking my feet outside the tent we camped in, on our absolutely wonderful canoeing trip…

Yarn; Morris Empire Merino 4ply in col 449, delightfully called Cha-Cha Pink; and the small bit of Sheen Green colour way is leftover from my hand warmers.  I used my go to sock pattern, from a 1960’s Patons pamphlet that I’ve inherited from my grandmother.

also here in the stunningly beautiful houseboat we stayed in, on the Khutzamateen River.  I think I’d juuuust finished them here and popped them on for a photo opp immediately!

Item TWO! or should that be… items three and four?!

A pair of adorbs little hand warmers…  photographed against the majestic back alleyways of Vancouver in beautiful British Columbia, Canada.  Pose is thanks to a grapefruit mimosa and the influence of a group of hilarious Vancouver ladies with whom I spent an awesomely fun few hours… thanks so much to MelanieSueSveta, Barbara and Louisa for a fabulous morning!

from left: Sue, some random tourist, Louisa, Barbara, Sveta, and Melanie  and yes, those ARE indeed the aforementioned grapefruit mimosas, ahem…

this pic and the one below both courtesy of Melanie… thanks so much Melanie!!

me with my loupe sister, Melanie… we’re both wearing our magnifying glass “loupes” made by Melanie’s talented husband Osamu Kobayashi… I’m proud to say I was Osamu’s very first customer!  I wear my loupe every day and it’s absolutely brilliant for reading menus, labels in Spotlight or in the supermarket when I can’t be bothered hauling my spectacles out of my bag….BRILLIANT, I SAY

and I’m wearing my cha cha pink glovelets, natch! Right here they’re hot off the needles by about maybe an hour, tops !

Anyway… the deets, I’d taken two balls of the cha-cha pink and of course there was plenty of leftovers, and I thought there’s sure to be enough to do something… And fortunately there was plenty!

I just made them up as I went along, pretty simple; and I’ve written a little pattern which I am happy to share.  Please feel free to use, I just ask as always that if you do then please do credit me and link back to me here  🙂

Simple hand warmers:

Note: one size, fits most ladies

Materials:

approx  120m (135 yd) of 4ply (fingering weight) yarn… I used Morris Empire superwash merino 4ply wool  … this pattern uses only about two thirds of a 50g ball

set of 4-5 double pointed needles 2.5mm (US 1) or whatever gives the correct tension as stated below.

Tension (gauge): 31 st and 45 rows to 10cm

Cast on 60 st and distribute stitches evenly onto 3 needles, continue working in the round…
K2 P2, repeat for 10 rows/rounds
Switch to K stitch,continue knitting for a further 22 rows/rounds, turn
sl 1, P59 st… turn.
sl 1, K59 turn
Rep previous 2 rows for a following 20 rows, turn
sl 1, K59 then join work again in the round and continue knitting for a further 12 rows/rounds
Commence K2 P2 rib, continue for 35 rows/rounds.
Cast off loosely

Repeat second hand warmer the same way.

And I’m wearing them today too… wanna see how I “styled” them?  I know what you’re thinking… those things don’t go with her outfit AT ALL.  No, they don’t.  They really really don’t.  But I’m wearing them anyway, hehe. #SayNoToGoodTaste #GoodTasteIsEvil

Details, above:

Blouse; Sudley by Megan Nielsen patterns, in mustard silk crepe, details here
Skirt; Axel by Megan Nielsen paterns, in terracotta pleather, details here
Cardigan; Miette by Andi Satterlund, in Debbie Bliss Donegal luxury tweed in colour Gold, details here
Leggings; self-drafted, in over dyed cotton jersey, details here
Socks (not seen): knitted by me, details here
Boots; Roberto del Carlo, from Zomp shoes

Details, at top:

Tee; self-drafted in striped jersey knit
Skirt; Jade by Paprika patterns, in charcoal cotton jersey
Tights; self-drafted, in black stretch, details here
Shoes; Merrell

SaveSave

SaveSaveSaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSave

SaveSaveSaveSaveSaveSave

SaveSave

pinterestmail
Switch to mobile version
↓