2016 - Page 2 of 12 - Handmade by Carolyn

Japanese Liberty shirt for Craig

04/12/2016 12:08 am \ 45 Comments \ Carolyn

Hello! I’ve been sewing a new shirt for Craig… and feel quite bad actually because we bought this fabric for him during our visit to Japan last January… nearly a whole year ago! Yes, I feel terrible.

Anyway, now it has been made, finally, all done and dusted, better late than never!

Pattern: I even treated myself to a new mens’ shirt pattern! this is Burda 6874. My old favourite Burda 7767 is very very used now and a lot of the cutting lines have almost fretted away and a few are barely visible anymore. I’ve still got it and will use it for the collar variations, which have always been its best feature. This new pattern is very nice too; it is a basic yoked mens’ shirt pattern, quite slimline, more slimline that my old pattern! with two back variations, curved hemline, regular or hidden button band variations, long cuffed sleeves, a collar stand and collar which can be made as a regular collar or a button-down… and when it comes to that please don’t get me started on the widespread but incorrect use of the term “button-down” as it applies to shirts… my pet hate grrrrrr. Hint; it’s not about the shirt at all, but the COLLAR. If the collar buttons down onto the shirt, it is called a button-down shirt. If the collar does not button down onto the shirt, it is NOT a button-down shirt. Simples.

(deep breath) ok so this is clearly NOT a button-down shirt… as per Craig’s request I also made it with short sleeves and gave it a hidden button band. It’s interesting that the hidden buttons do not have even spacing under that band… the space between the second, exposed button and the next one down is shorter than the others… this made me a little nervous when I was stitching those buttonholes, I checked the pattern, and double-checked! and yep, it IS supposed to be like that!

Also above; I decided upon welt pockets rather than patch pockets. No, they can hardly be seen in amongst that busy print. I’ve made my peace with that, at last, though that was the motivating factor behind my decision to topstitch throughout with black thread, to make all the details of the shirt stand out a little more.

I made up the pattern almost as is, with just a slight custom-fitting alteration for Craig, namely extending the underarm by 2.5cm, and that same width to each side of the sleeves at the underarm too. This extra width is tapered away to nothing by the bottom of the sleeve. It’s a similar alteration I always did to Craig’s Burda 7767’s too, but slightly different/less exaggerated since the fit of the new pattern is slightly different. Or maybe Craig has slightly changed? always possible I suppose!

All seams are flat-felled, including the armscye seams, and see here for my tutorial on how to flat fell a curved armsye seam (as below). I also did the yoke using that burrito method, so there was no need for hand stitching. Still had to hand stitch the inner collar facing down though… I don’t think the method has been invented yet that can eliminate that!

Fabric; Japanese Liberty tana lawn, bought from Check & Stripe in Tokyo, during our holiday last January. Craig chose it himself; the little village and woodland scenes are so lovely. Do I wish I had bought more, and even a little bit for myself YES!! but oh well. I did buy plenty of other fabrics for myself, don’t worry. But oh! Liberty such a true delight to work with… its so pliable, smooth, even; it passes through the machine beautifully, folds and presses so crisply and perfectly. I just wish I could sew with it more often!! The little unobtrusive black buttons are from Spotlight. I know, not very worthy, huh. Bit of a letdown. Well, it’s not like the buttons are going to steal any shows here. That beautiful print does all the talking!

Posted in: sewing, Uncategorized \ Tagged: Burda 6874, Craig, mens shirt

black Sophie bikini

29/11/2016 10:37 pm \ 18 Comments \ Carolyn

Hello! I’ve made this new bikini…

Pattern: the Sophie swimsuit by Closet Case patterns; and yes, I did make two sets of Sophie bikinis earlier in the year when I was testing this pattern but there were things about both pairs that I wasn’t happy with. With the pink/black one, while I really liked the bikini top, I really didn’t like how the colour blocking on the bottoms looked. And with my grey pair, the bikini cups really were just too scant for my liking.
But mostly, it just came over me that I really wanted a black bikini this year. I’ve also kept the pink/black top, altered it to be a halter neck; and also the charcoal bottoms and plan to continue wearing them too, mixing and matching with each other and with my new black ones here too. Now I’ve got so much choice!

Fabric: a quite thick, black stretch polyester/lycra fabric from Fabulous Fabrics. It has a slightly rough side which I prefer to the smooth shiny “right” side, so I used the rougher side out for my right side. This is what you can do when you Make Your Own!

Now, sizes and fit; and this is my tip for fitting a foam-lined bra/bikini top: Cut out the foam cups, baste together and test the fit of these on you FIRST! Once the fit of the foam cups is perfect, repeat the same alterations to your fashion fabric… This is the exact same advice I would give for self-fitting a foam lined bra for yourself.

My own personal fit modifications… and please skip this bit if you want! after all it’s only of interest to me, really! For both my black, and my pink/black bikini tops, I cut the size 4 but with a size 4 cup. I pieced together the 4/4 foam cups to check the fit. I like the size of this cup on me, coverage-wise, but the fit was just a little “pouffy” so I unpicked and shaved off or “flattened out” some of the curve (about 4mm) from the vertical middle seam on each of the cup pieces. Doing this gave me a really excellent fit; so then I just cut out the fabric cup pieces the same way; shaving off 4mm of curve from the inner edges of each cup piece. Otherwise I just made them exactly to the pattern, and recycled the bikini hook closure and underwires from that grey bikini top. That very scant grey bikini top I had made previously, was a size 4 with size 2 cups. It “fitted”, but had not enough coverage!!

With the bottoms; my black fabric is quite thick, almost a little scuba-like and isn’t hugely stretchy, so to be on the safe side I made size 6 bottoms grading out to an 8 at the hips. I didn’t think it needed a full lining but I did incorporate a “panty liner” of white stretch fabric, sandwiched between the front and back in the joining seam and basted it along each leg edge before attaching my swimwear elastic. I topstitched on each side of all vertical seams 1/8″ out from each side (above). You can barely even see this with the naked eye actually because of the black-on-black! but I just wanted it to be all finished off nicely and to stylistically fit in with that same topstitching on the bikini top 🙂

Sienna doesn’t like me going in…

… and is always relieved when I come out ok! Craig took these pictures and it makes me laugh how I kinda look like an IronMan or something, charging athletically out of the surf, haha! The water was cold!

Posted in: Uncategorized \ Tagged: bathers, Closet Case files, Sienna, Sophie swimsuit

a family collaboration

26/11/2016 12:29 pm \ 46 Comments \ Carolyn

So Mum is up to stay with me, and she popped out the other day wearing this gorgeous, completely handmade ensemble… and it occurred to us that it was a tri-generational effort! Mum made her skirt, Cassie made the scarf for Mum a few years ago, and I recently made the top for her. I asked her if she minded if I took a picture to share on ye olde blog and she graciously said yes.

SO! What have we here?!

Pride of place of course goes to Mum’s skirt… a fully hand-embroidered and hand stitched Alabama Chanin skirt; with embroidery in the reverse appliqué method, and using the four panelled, mid length skirt pattern from the book Alabama Studio Sewing + Design by Natalie Chanin. The cotton jersey fabrics were originally white and Mum dyed them herself in two different shades of grey and blue. Mum traced and cut the stencil design June’s Spring from p116 in the book herself, enlarging by 300% as recommended, (also available as a pre cut stencil on the Alabama Chanin website here) She printed the design in creamy-coloured textile paint, and hand-embroidered with a running stitch in double strand of cream Gutermann’s upholstery thread.

When snipping out the motifs she carefully left a very narrow border of the cream stencil round each one.

Exquisite, oui?? I adore everything about this skirt; the colours, the design, the workmanship; and it’s just slightly tempting me to get out the materials and get a-hand-stitching again. Slightly 😉

The scarf… Cassie made the this gorgeous seaside/beach-inspired silk scarf for an art project at school. She hand-dyed and -painted white silk habotai in blue and yellow blocks and blobs, tying parts of it in the shibori style, then stitched a wiggly row of blue stitching for the tide, and embellished with clusters of mini yellow glass and gold beads. The hems are hand-rolled and -stitched.

I can’t believe I’d almost forgotten about this beautiful piece of Cassie’s and feel so lucky and proud that I have two such talented and creative ladies in my life.

Mum’s top is made by me, and yes it is very plain… ! A month or so ago Mum mentioned how she specifically wanted an unobtrusive, very plain white top to wear with this skirt so I offered to run one up for her… I chose the Esme top pattern from Lotta Jansdotter’s book Everyday Style and a slubby plain white cotton from Fabulous Fabrics. I measured Mum all over, secretly storing the measurements away for future use, mwahahaha… no one gets away from the handmade in my family!! and drew the pattern so as to custom fit it or Mum’s measurements. Instead of the neckline facings I finished the neckline with a bias cut strip, because I think it’s a much nicer and neater finish for a neckline edge. Mum wants to know how to do this herself so I’ve promised to write a tutorial sometime.

Anyway. She looks so chic and beautiful here, and it was so fantastic when we realised she was spontaneously wearing a collection of handmade family pieces… Such a fabulous and sentimental thing for the three of us. Thank you so much for letting me share, Mum!

Posted in: fashion, sewing \ Tagged: alabama studio sewing + design, dyeing, embroidery, everyday style, handcrafts, lotta jansdotter, Mum, scarf, skirt, top

the year of handmade, 9

25/11/2016 3:57 pm \ 12 Comments \ Carolyn

above is a small selection of my favourite outfits for the past month, the whole year’s worth can be viewed in my Year of Handmade flickr album, here…

Wellhowyagoingyeahalrightthanksyourself??

OK, so wearing my own clothes and shoes really has become like second nature. I think I’ve reached the stage in the challenge where it almost feels over, where I’m plodding along with it, can see that light at the end of the tunnel so I’m just kinda wishing it would hurry up and get here! I’ve started ticking off the days one at a time. 90 days to go!!!!

The stages I go through with every single time-based challenge I’ve ever undertaken are always the same, so my current feelings of meh-ness shouldn’t really be a surprise. To start with there’s the honeymoon period where I’m all fired up with excitement, followed by a slightly difficult period of adjustment once the initial euphoria is over, then a stage of acceptance where I’m just ok, still enjoying the challenge and coasting happily along on an even keel, then I slowly descend into an impatient restlessness. Well, a year is a long time. I’m sure as the end gets even closer I’ll get a small mental boost of excitement at the thought of successfully completing the challenge. I hope so!

And it will be so interesting to compare how comfortable my old rtw shoes are on my feet compare to the self-made ones I’ve been wearing all year, whether they really are totally amazing or whether I just remember them with rose-tinted spectacles as being more comfortable and better than they are and I’m just hypercritical of my own self-made shoes and feel like every single fault stands out like a whopping huge glaring error that simply must be able to be seen from a mile away, just because, well you know, that’s how makers are. I have a sneaking suspicion it will be the former, but we’ll have to see.

Speaking of shoes, to be honest, they are never far from my thoughts these days! 😉 my white oxfords are proving to be my current favourites… they go with everything and I think they look quite nice and well made too, if I say so myself. They even look a bit fashionable. My new white sandals are proving very useful too. I think I can even cautiously predict that if there are no disasters I won’t need to make any more shoes. Although I probably will. *sigh* you know what they say. Makers gonna make. It’s a weird affliction, and there’s not much point in fighting it.

Posted in: fashion, Uncategorized \ Tagged: year of handmade

acton dress, in the folds

10/11/2016 7:54 pm \ 27 Comments \ Carolyn

Hello, I’ve made a new sundress. Hmmmm, how do I love thee… let me count the ways. It’s easy. It’s breezy. It’s the palest of soft cloud-grey with teeny ivory stripes. It’s crinkly-linen-tastic on the outside, and lusciously silk-lined on the inside. It’s a midi length #currentcrave The skirt can be styled in multiple different ways.

That’s a lot of different ways.

Pattern; a few weeks ago Emily, the designer behind In the Folds contacted me, asking if I would like to review her new pattern, the Acton dress. Obviously I said yes! I love trying out new patterns! and this one looked like so lovely and elegant for summer, long clean lines, an interesting skirt, tres chic

Fabric; a crinkly linen bought at Tessuti’s in Melbourne a few years ago during a trip over there with Mum and Cassie. I remember I was going to make a shirt for one of my boys from it, but it wasn’t really the best fabric for that and I ended up buying pinstriped linens for them all instead, which was far more suitable. And by doing so, I then had the fabric all for my own selfish little self, while maintaining the virtuous position of having actually bought it unselfishly for someone else, mwahaha. My dress is fully lined with an ivory, silk crepe from Fabulous Fabrics. Actually leftover from my Ruby slip; and I just needed to buy a little more to get out the pieces.

For the straps and the ties; I used 1.5mm wide, white grosgrain ribbon. The pattern provides pieces and instructions to cut these out as bias-cut strips, but I chose to make them the ~~cheat’s~~ easy way. I overlocked all raw edges inside the dress, and hand-stitched the hemline in both skirt and lining

Thoughts and alterations: the pattern has two variations, or four if you count the fact that the bodice has two variations, and the skirt another two. Along with the fact that the skirt on variation B can be tied differently in several different ways itself, that adds up to …um, let’s just say “lots” of slightly different looks, to suit lots of different tastes, pick your favourite. I love having options like this in a pattern!

I made my dress with skirt B and bodice A that has a lower back. As recommended in the pattern, I used the skirt A pieces for my lining. There is an invisible zip in the CB seam, but with the lowered back of bodice A, I have found I can actually just slip the dress on and off over my head without having to zip it up or down. BONUS!! and darn that perfectly aligned invisible zip!

skirt wrapped and tied at front

The pattern is only available as a pdf; which I reckon is absolutely brilliant for those of us who want something NOW, however has the unavoidable downside that you have to tape all those pages together *sad trombone* If you’re printing out both skirt options as I did, because I was using skirt A pieces to line skirt B this is a whopping 64 pages in total. Yes, that’s a lot! Though, this is the entire pattern, and if you’re making the skirt unlined you wouldn’t have anywhere near that many 🙂 Also, of course you can always go the A0 route; take the file to a copy shop like Officeworks and pay a small amount to have it printed on three A0 size pages. This reduces the amount of taping to almost nothing. Me being the impatient bod that I am, yes: I printed at home and taped… and I save time and tape by cutting out and only taping together the bits that I absolutely have to.

I used to find pdf’s a bit of a pain but the instant gratification is undeniably a big plus and I consider myself an expert at this taping biz now.

skirt wrapped and tied at back

My measurements put me at a size C, and as mentioned, I can just slip the dress on over my head. I do have narrow shoulders it’s true, and my crinkly fabric does have a tiny amount of give, but the bodice does have that easy-wearing, loose-ish fit, which I reckon is a good thing for summer, or if you want to wear it over a Tshirt as I am pictured below. I found it necessary to do just a slight small bust adjustment; I did this by the simple expedited method of flattening the bust curve by shaving about 1cm off of the bust curve. Not very scientific, but it works fine for me…

skirt wrapped and tied at back

I also lengthened my outer skirt pieces about 7cm at the lower hem, to give a nice long midi skirt, just because I’m currently in a midi sort of a mood. A mood for midis 😉 Speaking of the skirt, let’s get into these skirt variations… what are these different ways in which it can be styled?

skirt loose and untied

Firstly, there’s just with the side pieces hanging down completely loose and with the ties tied up in themselves to keep them up off the floor. This is easy and comfortable, excellent for large Christmas dinners! and gives that sort of loose, flowy, “Lagenlook” to the dress.

Secondly and thirdly, wrap and overlap the side bits around to either the front or the back of the dress… (in photos higher up) I’m undecided as to which of these I like the best. They both look equally cool, I reckon. Craig likes them wrapped to the front (below).

skirt wrapped and tied at front

Finally; I’ve been seeing all the cool, fashion-conscious kids of the world wearing their long-line spaghetti strap midi dresses with a little cap-sleeved Tshirt on underneath, so thusly decided to give it a whirl (below)… and I really love it like this! It was too hot to wear it in Broome with the additional layer underneath, but right now in Perth our sorta-warmish-but-not-hot springy weather means it’s simply perfect to wear a sundress with Tshirt, for that little bit of extra coverage. And the ties, for this “look”, I just tied them very loosely at the back without “wrapping” the side bits over each other. This does look nice too, I think, more casual and allows the long sleek lines of the dress to hang more gracefully. I actually think this could be my favourite way though it’s a close one. I do really like the way the skirt can be worn such a lot of different ways and plan to mix it up every time I wear it!

skirt not wrapped but loosely tied at back

Now, for some business-y notes. Emily kindly offered me an affiliate link for the Acton; and while up until now I have earned not one single cent from my blog and I have often said I wouldn’t do affiliate links, I have decided it’s time to give it a go. So my links to the Acton pattern will pay me a very small commission if someone chooses to buy it through that link. Please bear in mind that the commission paid to me is NOT an additional cost to the pattern; if you buy the pattern the price is exactly the same whether you buy through my link or otherwise. I just wanted to explain that just in case anyone was unsure and was wondering how it works. If you have enjoyed reading about and looking at my sewing projects over the years and also wish to buy this pattern, then please do not rule out this option 🙂

The Acton dress pattern is available from Emily’s site here; and you can also read more about Emily, an honours graduate in fashion and textiles from the University of Technology Sydney, and her other designs here

loosely tied at back

Details:

Dress; the Acton dress by In the Folds, in grey striped crinkly linen, lined with silk crepe
Tshirt; the Nettie, white jersey, details here
Hat; Vogue 8844, ivory corduroy, details and my review of this pattern here
Sandals, in the beach pics; designed and made by me, details here
Clogs; in the garage pics; designed and made by me, details here

I took these beachy photographs on Cable Beach in Broome; a place which captured my heart during our holiday a few weeks ago and from which I did NOT want to come home. I’m not even joking. I’m getting that happy, eternally-summer vibe all over again, just looking at these pictures *sigh* Minimums 25C, maximums 32C every day; huge beach, squeaky white sand, almost completely deserted. Heaven!! I want to go back!!

Bonus picture; husband was intending to stay well out of the way but still managed to inadvertently photobomb, haha

LATER EDIT: the dress has had a minor update! I sliced off the wings, angling from the waist seam in a straight line out to the unaltered hemline… so the dress still has those lovely handkerchief points in the hemline, but is a little more streamlined about the waist and hips.

LATER EDIT:

the dress has had another update!

fairly major this time… it’s been worn quite a lot and I was getting a little bit tired of it… so it got rather summarily dunked into the dyepot… from which it somehow managed to emerge totally transformed into something newly amazing and magnificent to my eyes… I’M SO IN LOVE WITH THIS DRESS ALL OVER AGAIN!!!!

Posted in: sewing \ Tagged: acton dress, dress, dyeing, in the folds, pattern review, photobomb

white inari

02/11/2016 11:36 am \ 41 Comments \ Carolyn

Mum and I went shopping together on my birthday; her for my birthday present, and me for her birthday present! yes, our birthdays are just a few days apart so this is a bit of a tradition. We went to Fabulous Fabrics. Haha… well how unexpected! *wink*

After much lengthy and highly enjoyable hunting, comparisons and consultations with each other, Mum chose this really beautiful fabric for me. it is thick but very light and airy, has a nubbly, ultra slubby texture and is as pure white as the driven snow. I absolutely adore it, in fact I’d been salivating over it whenever I saw it, ever since it came in. Getting a little bit to give me is extra thoughtful of Mum when you take into account that she doesn’t think white really suits me at all. I kind of agree with her up to a point… however! I still totally adore it, because ~~I’m a dreadfully contrary soul~~… no not really, I just have this thing for white clothing, particularly for summer, I love it with a fierce and burning passion…even a white-hot passion! Mum knows I do, so I thought it pretty sweet that she overrode her feelings to give me something I really love.

Pattern is the Named patterns Inari tee dress. This is my “real” Inari, for which I ran up my previously blogged red striped “muslin”! though of course they are both wearable since I found I needed to make only minor changes to the pattern for it to be perfect.

Something I mentioned in my red-striped inari post, the dress made as per the pattern rides up a bit when you lift your arms, so for this version I made the following simple modification to the sleeves to help reduce the problem:

What I’m doing here is adding width to and reducing the height of the sleeve cap slightly, and doing so without altering the armscye. Diddling about with both the sleeve and the armscye is possible if you really know what you’re doing #idonot; however can be quite complicated and so I tend to not go there… I would prefer to substitute an entirely different, tried-and-true sleeve cap and armscye from another pattern if it came to that!!

from L to R, top to bottom:

1) Trace the sleeve, and draw a line from the shoulder seam junction mark near the apex of the sleeve cap down to the lower edge, parallel to the grain line.
2) Cut from the lower edge up, leaving a scant few mm at the upper edge still attached. Pivot the two halves open; I allowed a gap of 4cm (2″) in width, although you could stand to go a little wider, if desired.
3) Tape a piece of paper to fill and fix the gap
4) redraw that lower hem to curve smoothly in a similar line to how the sleeve was previously, and trim
5) Original sleeve and new sleeve, juxtaposed. You can see how the sleeve is wider; and not seen, but the height of the sleeve cap has been reduced by 2.5cm (1″).
6) Very important!!! remember to measure the length of the new lower edge and cut the sleeve cuffs accordingly! They’ll be a bit longer than the sum of the original width and the width of the gap created in step 2.

Demonstration of results (below); The dress does still ride up a little bit however not nearly as much as previously, at right. To lessen the ride-up even more, you could go even further with widening the sleeve and “flattening” the curve of the sleeve cap even more. Or alternatively of course, you could always substitute an armscye and sleeve cap from another pattern, at a pinch!

I’m pretty happy with this though 🙂

Finishing details:

I still didn’t use the neckline facing, but turned in the seam allowance and finished with a piece of bias-cut white linen. Similarly at the lower hemline, the raw edge inside is bound with bias-cut white linen and then handstitched, this looks nice if anyone happens to catch a glimpse of that back hem inside.. which lets face it, is quite possible because of that low-hanging back edge, and also eliminates the bulk that you’d get if you turned the fabric under twice.

Bonus picture, photobombing daughter…

Fun fact, she made the dress she is wearing here; it is a cute and interesting tank dress with tucking up one side and side split detail on the other, made in blue marl jersey that she bought in Japan. She’s wearing it over the skirt that I made for her, here. Honestly, she makes the most lovely things, but doesn’t really share them on any social media. Occasionally I persuade her to pose in something she’s made, like the time she made this really divinely beautiful ivory cut-out lace top…

Gorgeous, isn’t it?

Details:

Dress; Inari tee dress by Named patterns, white slubby cotton mix
Shoes; designed and made by me, details here
Sandals in top picture;designed and made by me here. this picture taken on Cable Beach during our recent holiday

and hmmmm, I’m sorry that I’m closing with my dress here… bit of an anticlimax after Cassie’s top!!

Posted in: sewing, Uncategorized \ Tagged: Cassie, daily outfit, dress, inari, named patterns, photo-bomb, tutorial

red striped Inari tee dress

29/10/2016 10:22 am \ 23 Comments \ Carolyn

Heya’all. I’ve made this new dress. Actually, I made it ages ago. And took most of these photos ages ago too. Bad lazy blogger!

I wore it recently as my “travelling dress” when we holidayed in Broome, and it was the most AWESOME travelling dress… why? well it’s a loose-fitting, baggy, dress made in a comfy fluffy fleece, so just about the most amazingly comfortable thing EVER! pretty much like wearing a blankie. At the same time, there’s something about the curved, slightly cocoon-y lines of the dress that I think makes it quite smart, chic and pulled-together. This is actually my wearable trial of the pattern and I absolutely love it. I might almost love it more than my “real” version. Almost. I actually love that one a bunch too. To appear here very soon.

Pattern: So, yeah; the Inari tee dress by Named patterns. SUCH a popular pattern, and as I now appreciate, for an excellent reason. It’s terrific. Simple, yes; and basic, and bordering on a boiled-down-to-the-bare-bones kind of a pattern with just a few very subtle features like that slight cocoon shape, the side seams drifting gently frontwards, the split hem and an up-down front and back hem. And I love it. I’m normally attracted to a more complex design for a dress, but this one just hits all the right buttons for me right now.

Fabric; a red and white stripe mid-weight fluffy fleece from Spotlight. This is the same fabric I used for Tim’s Christmas hoodie and for Kelly’s hoodie too. Yep, I bought quite a lot! there was a sale… um, yeah *awkward self-justifying of excessive fabric acquisition* Well, at least I’ve used it all now. This has been kicking around in the stash since pre-Christmas, since I’d decided it didn’t really suit anyone else in the family. I think it suits me though!

My stripes are matched up as perfectly as my obsessive little soul could manage. I’m smugly and complacently satisfied with how well they turned out… the only way I know how to achieve this level of stripe matching is to pin each and every junction and go nice and slow. Tedious but failsafe, and all my stripes here match any which way and everywhere. *primly pats self on back*

sewuthinkucan asked me on instagram whether I found the high slim sleeves on the design to cause the dress to ride up when you lift your arms up as above: not that I pull this pose all that often and probably will be careful now I’ve seen these pictures! but it does a little. Not enough to stop me from wearing it! I think the effect is not too bad because of my fabric being a little stretchy. However, in my next, “real” version of the pattern, I altered the sleeve so as to successfully fix the problem… and will post details on that in my next Inari post.

Alterations; the most obvious one is inseam side pockets! Well, of course. It’s baggy enough and the side hems curve forward slightly to the front, an even more comfortable position for your hands than the true sideline of your body; making inseam pockets an almost foregone conclusion.

My neckline has neither facings nor bindings; partly because my fabric has too much fluff and loft for bulky extras with incorporated double seam allowances etc, and also because this is basically my wearable muslin for the pattern and I just didn’t want to fuss around with it. I overlocked the raw edge and simply turned it in once, topstitching in a single line of stitching from the right side. My fabric is all of thick enough, stretchy enough and stable enough for this to be totally fine. I did do the sleeve cuffs though.

Details:

Dress; Inari tee dress by Named Clothing, red striped fleece
Shoes; designed and made by me, details here

taken after a plane trip, a week rolled up in a suitcase, another plane trip, and precisely zero ironing. LOVE.

Posted in: sewing, Uncategorized \ Tagged: daily outfit, dress, inari, named patterns

the year of handmade, 8

22/10/2016 9:21 pm \ 14 Comments \ Carolyn

I’m now 8 months into my year of handmade! two thirds of the way through… Above is a small selection of some of my favourite outfits from over the past month, the entire collection so far can be viewed in my Year of Handmade Flickr album for the challenge, here

What to say, what to say… well, I’m still chooffing along, one foot in front of the other, which is an excruciatingly apt analogy since my one big Challenge out of the thing continues to be my shoes! Clothes have presented no problems whatsoever, I’ve been wearing all my own me-made clothes for many years now so zero dramas there. I guess doing this challenge while I was still learning how to make shoes as opposed to feeling comfortably accomplished at it; well that has been the kicker. I still consider myself an advanced beginner, or maybe a low/intermediate shoemaker and am under no illusions as to my abilities. Or lack, thereof, ahem. There have been times I’ve positively longed, longed, I tell you! to just slip on a pair of old sneakers, or a pair of chic high-heeled pumps or pretty stilettos, none of which I am capable of making myself.

So, I guess as a natural follow on from that, I now have a HUGE appreciation for well-made rtw shoes. So far, I’ve mostly avoided going into shoe stores; it’s just been better for my own self esteem not to! because my own shoes do not compare. Anyway, just recently I did; Cassie and I went into Zomp because she wanted a new pair of shoes for herself. Well, I don’t know what I looked like… I think I managed to keep my cool on the outside, but on the inside I was positively drooling. Seriously! Picking up, handling all those lovely shoes, inspecting them all over with hushed and awed reverence, like I was holding my newborn baby for the first time or something… ok I’m exaggerating but honestly, not by much. Possibly it was inevitable that RTW shoes would get set upon a mental pedestal for me right about now. It’s like, in my current new state of awareness, a pair of well made shoes is like the most amazingly beautiful little work of art. Seriously. It’s not easy to make a shoe, let alone a matching pair; and with my newfound appreciation from having struggled to make my own, I’m blown away by how amazingly, perfectly constructed most rtw shoes are.

I know that sounds rather dramatic, yes? well I expect only those of us who have ever gone this far will ever understand what I mean here. I’m wondering what it’s going to even feel like, going back to rtw shoes… will it be amazing? a relief? nothing special? a letdown? Hmm, I can hardy wait for that day to find out 😉

Posted in: fashion \ Tagged: year of handmade

« Previous 1 2 3 4 … 12 Next »