Tag Archives: Bag

box of socks; the June edition. plus a bag!

26/06/2019 6:54 pm \ 9 Comments \

Pair of no-frills socks, but look at those pretty stripes!  LOVE those bright pastels!!  Making these has dutifully used up some more of the leftovers from my advent jumper, from the Dingo Dyeworks advent calendar of last year…  pretty cute and frugal, huh? *self-back-pat*  and this yarn is so soft and divinely snuggly.

the box of socks is looking quite colourful!

Oh! and I also ran up a little bag, specifically for my sock knitting.  I’ve been using my pink bum bag for this purpose ever since Japan, which was… fine, I guess, but still not ideal.  It wasn’t really big enough, for one thing, and had zero pockets.  Hmmm, yes; ordinarily a zero-pocket bag would have its days very much numbered, except that I’m kinda sentimental about it since Mum and Dad gave it to me when I was quite a young teenager and it’s always been … well, one of those forever things, you know??  Anyway, I digress…  What I really wanted for my knitting bag was one identical to the one I made for Mum, blogged here.  So I rummaged through the old clothing chuck-out bag and came out with a pair of old chinos that I used to wear when the kids were really little. Haven’t worn them in decades and don’t really know why I kept these hideous things but probably for the usual reason, that the fabric would come in handy some day.

The new bag is terrible really; slapdash, ugly, just thrown together in a very uncaring way.  But man, it was so much fun to do a bit of rough, random, whatever sewing!  Quite a therapeutic project, in fact!   And/or cathartic!  Slicing, dicing and cutting on the fly, drawing straight onto the fabric, machine-stitching rather wildly, minimal measuring, if any.   FELT SO GOOD.  THIS HOUSE, IS CLEAN!!!

I used the back of the chinos, and gave the bag a “bottom”, so it can stand up by itself.  It is self-lined, using more of the same fabric from a leg of the chinos, and has five pockets including the two outside patch pockets with buttoned flaps, that were originally in situ on the seat of the chinos.  Inside, I stitched two new, rectangular open patch pockets to the lining, as well as the tiny and rather adorable coin pocket that I painstakingly unpicked from the chinos just because it was so super cute.

I slipped a few coins in there for … I dunno, just in case

The other pockets hold my kindy scissors, my notebook and pen, a wool needle, and my personal, basic knitting pattern.  Which is near-identical to the Patons one I’ve been using for years, but has one or two mods that I’ve developed along the way to make my own idea of the perfect sock.  Actually I recently re-typed it all into a new word document so I can print it out for myself any time, and now I no longer have to decipher the old photocopied one from the Patons pamphlet that is almost falling to bits from un-folding and re-folding, and has multiple crossing-outs and arrows and modifications and notes scribbled chaotically in the margins and on the back.  Hurrah!

The inside waistband of my old chinos had  a rather nice bias bound strip finishing, so I kept this and used it to edge the, also recycled zip for the bag,  Goodness knows why I once went to the trouble of ripping out and stowing away an old zip just in case, but hey.  I did indeed find a use for it in the end!

So, cute bag? or piece of trash?  completely rhetorical questions btw since I know that; yes it is a pretty rubbishy sort of a thing!  It’s nowhere near as nice as the one I made for Mum, which I did measure out, cut carefully, and sew somewhat meticulously, and also had really nice fabric going for it.  But it only cost me some thread and half a day, and it will do for now.  And I had a lot of fun making it!  Maybe I’ll treat myself to a proper one, one of these days.

couldn’t resist taking a picture showing my ever-present companion, wondering what the heck I’m doing…

pinterestmail
Posted in: knitting, Uncategorized \ Tagged: , , , , ,

rope market bag

27/12/2018 2:41 pm \ 7 Comments \

< So this is embarrassing… I made this bag in October… last year!  It has sat up in my laundry, only awaiting the handles; and the following draft post has been sitting forlornly in my drafts folder ALL THAT TIME.  But no more!  I finished the handles last month, polished up the draft post and just bunged in some pictures and bammo…  DONE!  Finally! >

hehe, anyone who knows me knows that I don’t make bags very often… it’s the one luxury I BUY! but I saw this tutorial by Amy over at Heather’s blog Closet Case patterns and just thought it was super chic and cute!! Coincidentally, when I pinned it I found that a few years previously I had also pinned a similar tutorial written by Erica over at honestlywtf.com! Guess it was a sign… for me to get on and DO it!

 

I’ve been carrying my shopping in generic carry bags rather than plastic shopping bags even before the placky-bag bag came in, because I’m such a bag snob, hehe, and while I do have a quite a lot of perfectly serviceable plain ones stashed in the boot of my car I decided I wanted a nicer one for when I wanted to look more classy-like in the supermarket.  Probably just because I wanted to give this awesome tutorial a go more than anything else, to be honest…

I bought 3 bundles of this cotton rope/cord from Bunnings and just had at it… my first fold is 20cm, and I started sloping the sides after just 10 rounds, because I wanted my bag to be wide, but flattish.  The longer your first fold, the wider the bag, widthwise, and the more rounds you stitch before sloping the sides up, the “fatter” your bag will be.  My bag itself is two whole bundles of 25m, and then I decided I wanted leather handles rather than rope ones…. I had a small scrap of deep chocolate brown leather from when my friend V was cleaning out her stash.  I punched the holes for the stitching using the leather tool I bought from Skinhuset in Copenhagen during our visit there a few years ago, and handstitched using a leather needle and deep chocolate brown Gutermann’s upholstery thread.

 

I also wanted some little internal pockets inside the bag; one side has a zipped one for keys and the other has an open,  more accessible one for my phone… these are made from a stiff, cream-coloured cotton broadcloth, actually the same stuff I used to make my rag-doll Sally… and I just zig-zagged them down inside the bag.  Because there’s all the mad crazy zig-zagging going on on the outside of the bag already, you don’t really notice a little bit of extra zig-zagging for the pocket attachments.  The perfectly matching “rustic” chocolate-brown zip came from an old pair of jeans that I previously cut up for another project…

so that’s it!  I really really love it, and think it will come in handy not just for shopping, but just for anything and everything, really.  So far I’ve used it precisely once, when I took it to my local Australian Sewing Guild meeting, to hold my sewing stuff.  It worked!

pinterestmail
Posted in: crafty stuff, sewing \ Tagged: , , ,

the bumper Christmas edition

26/12/2018 3:19 pm \ 10 Comments \

So, every Christmas I like to make a small mountain of stuff for my loved ones; this year was a smaller mountain than previously, mostly because I embarked upon a sorta epic making-adventure of a more selfish variety, ahem … but more about that particular project in a future post!  But I did still manage to make some bits and pieces for others!  btw, I was too busy to take any photos on the day, woops!  but I’m hoping to get some modelled shots here sometime soon  🙂

Items 1-5; it’s always difficult to think of something for the boys, something “useful”, because boys are never just about the pretty things like girls are. Also, because I actually prefer practical and useful myself too, always.  I recently discovered elbe sewing patterns through instagram, and noticed that she had very kindly made a free pattern available; the Sorrento bucket hat.  Freeeee!  So generous! and I thought it would be fabulous for my guys who do wear hats all the time. Craig, for one, who has been wearing the same sad shabby hat for about a decade now, ahem. Yes, since I make stuff it has indeed been a point of embarrassment, hehe  ;D  A hat also seemed like the perfect gift for Cassie’s man D, notoriously difficult to buy/make for.  He loves fishing with a passion and was apparently in need of a new fishing hat, according to Cassie.  Great timing!

Tim’s hat

I had to measure everyone’s heads… awkward! but well, I guess everyone’s used to my strange stealth-measuring attacks by now!  Cassie helped me out by stealth-measuring D’s head… she said she did it while he was sleeping which made me laugh to imagine that!  Fortunately he says it fits him perfectly!

D’s hat…

The boys’ hats are all made from Spotlight’s cotton drill, it’s hard to find fabrics that are both masculine and interesting, but luckily Spotlight currently has these camouflage prints in a wide range of colours. SO AMAZINGLY LUCKY!!!

Craig’s hat…

I opted to interface the brims with medium weight fusible interfacing, and they are all fully lined; Cassie’s with a stiff white cotton, the drills I used for Craig’s and Tim’s both have an olive-ish cast to them so I used an olive poplin from my stash for them, and Sam’s and D’s are both more blue-ish so for them I cut up the trouser legs off an old pair of Sam’s navy blue work trousers.  It was exactly the right shade of navy blue, and also a really nice weight for lining a hat.

Sam’s hat…

And I found this old label in my notions basket! the very last one! leftover from when I used to sew their names in their school uniforms! I had a little giggle putting this in, and Sam too when he saw it in there on Christmas morning.

Cassie’s hat…

I also made one for Cassie using some of the leftover fabric from her Christmas dress for this year…  more on that later!  Cassie’s floral linen is very lightweight compared to the cotton drill that I used for the boys’ hats, so I fully interfaced all the pieces in this one, including the lining, with medium weight fusible interfacing.

This is a free pattern so obviously you can’t complain, and I’m not! because this is a fantastic little pattern! However one thing I want to note for if I ever use this the future… the pattern specifies 30cm for fabric and 30cm for lining. Yes, this is technically correct; but personally I prefer for the brim lining of a hat to be of the same fabric as the shell, because you can see it while you’re wearing it. So if you’re cutting out all 4 brim pieces from the outer fabric, 30cm is enough, but just barely! and only if you throw all grainline specs out the window and are super vigilant about miserly pattern placement! I did make sure to cut the band pieces on grain though, I think you have to for the hat to look nice.  If you want to cut the brim plus brim lining pieces all on grain then you’d need at least 40cm, or 50cm to be safe

I made all my paper pattern pieces full size, which I HIGHLY recommend; because when you are cutting out fiddly little pieces like these on the fold, and in multiples; then they rarely come out identical to each other.

Best thing; everyone seemed to love their hats! I might even get around to making one for myself one day 🙂

Items; 6-7; I was going to make hats for Tim’s fiance Kelly and for Sam’s lady L too, but when it came time for choosing prints for them, well I chickened out!  There were loads of gorgeous prints in Spotlight, pretty, feminine and cute and probably lots that they’d love, but well, you know, choosing a print for another girl is quite a personal thing, and I was nervous they wouldn’t like my choice. Eventually I hit on the idea of making a reusable shopping bag for them.  Yes, these are in a print too, that I chose, but a bag is definitely “safer”!

During the last year, it became illegal for supermarkets here to give out single-use shopping bags, and now everyone has to remember to take their own shopping bags for their groceries… of course there are lots of branded reusable shopping bags you can get but everyone likes a cute one to hang up in their kitchen, yes? Kelly and Tim have recently done up their kitchen and btw, it looks AMAZING!!! it’s all dramatically jarrah, black/white, stainless steel, and grey blue; and they also have a lot of indoor plants there. So I chose the above fabric for Kelly’s.

For L; well she loves baking, and she loves cute stuff, so when I saw this bright and fun doughnut print I knew instantly it was perfect for her!  

I made my own pattern, based upon the measurements of the little bag holders in Coles checkout stations. My own experience is that the stitched-on-strap style of handle is a weak point in shopping bags, the first thing to go; so I designed the bags to have cut on handles, and to be reinforced with a facing.  It is a bit of a fabric hog to cut it out like this, but I’m thinking it will prove to be a much stronger and robust design than separately cut and stitched on straps. 

  I found some pieces of stiff plastic film to line the bottoms of the bags, and for the groceries to sit on.

Item 8; Cassie specifically requested that I make a dress for her this year, and we went to Fabulous Fabrics together to look at fabrics. They had this divine pink hydrangea print in a cotton sateen, and Cassie wistfully fingered it and mentioned she would love this if it was in linen. We looked at a few other prints and she pointed out a few others, which I tucked away in my head for the future, mwahaha. But just imagine my joy when I went back in to actually buy something for her, and saw they had actually JUST got the hydrangea print in, IN LINEN! PERFECTO!

For the patten, I cut up an old favourite little tunic dress, that she had discarded a long time ago; it is a simple but very pretty little T-shirt style, with a high rounded neckline finished with bias binding, raglan sleeves folded up at the hem, and a centre back zip, and I always thought she looked gorgeous in it. The new dress did seem a tad short when I’d finished it, but otherwise I was very pleased with it. Then she tried it on on Christmas morning, and it was Super Short!  Turns out 26yr old Cassie likes to wear her dresses a little longer than 18 yr old Cassie did, haha. who knew?!  😉  Anyway, fortunately I had extra fabric, even after making her matching bucket hat, so I extended it with an extra piece attached underneath the hemline. This is a technique I’ve used on several of my own dresses in the past, I do think it makes for an interesting hemline detail, even if you don’t need to add length.  To make it look more like “intentional design detail” rather than “whoops, need to add length because it’s scandalously SHORT” I folded and stitched a series of tucks, and love how this looks!  A hidden bonus is that this adds some weight to the hemline… and I think linen dresses can often benefit from a little extra weightiness at the bottom.

Items 9-2000, might be overshooting the mark but just roughly guess-timating there; so I also like to make something both useful and fun for my extended family members, and this usually ends up being an edible something … this year it was gingerbread pussycats! So of course we have our own three darling little fluffykins, and I hit on the bright idea of icing the gingerbread puddycats to symbolise The Girls.

I’d made huge batches so this took quite a long time, but turned out pretty cute I think! The kids were tickled pink!

My recipe is adapted from a free recipe from Taste.com, and my own lemon icing is a sort of hybrid royal icing/ regular icing. Sophie has green eyes, so I painstakingly picked out the green cachous from a multicoloured jar. I couldn’t get black food colouring! so settled for dark purple-y/blue for Sophie, and sky blue for Zoe, who is a greyish blue point with blue eyes. Zoe was by far the fiddliest pussy cat to recreate!

Mischka is a mischievous fuzzy wuzzy ginger striped pussy with amber eyes, so I tried to capture her cute and perky nature with a riotous striped icing.

It’s funny; everyone immediately said, “but what about Clara?” and there were lots of jokes as to why she was excluded from the fun but of course the real answer is perfectly simple… I don’t have a dog-shaped cookie cutter! Maybe next time, haha.

I buy these airtight thingies to give them away in,  see, practical and useful are my middle names!  Each one perfectly fitted 16 gingerpussies.

So, I blog very very rarely about the meals I make; but this year Craig and I decided to cater for the entire extended family lunch, which is a BIG undertaking. We ambitiously planned for a rather (for us) long and involved menu and I’m so proud of us for pulling it off that I thought I’d share … we made all the various dressings and everything!

the makings of maple carrots…

pumpkin and couscous salad…

German-style potato salad…

BBQ asparagus, zucchini and snow pea salad…

veggie rosti with smoked trout; we doubled this recipe and made one with the smoked trout and the second one with smoked salmon

peach and raspberry trifle…

and cherry and nougat semifreddo

the recipes are all from the free Coles cooking magazine that they put out every month. Fair dinkum, this is hands down my favourite source of recipes at the moment… I love it!  We also had a ham that I forgot to take a picture of, and Vintage Cellars had high-end champagne going for half price so I bought a dozen of these… honesty, it all felt very special and went so well, we had such fun, and we were so chuffed everybody at our party had such a gorgeously happy day too!

So that was Christmas this year!! it felt rather epic and stressful all month leading up to it, but now it’s the morning after, and I’m feeling peaceful and relaxed with a happy post-party glow, the house is clean and back to normal; and most of all I am SO GLAD that I did go to the effort of making as lovely a day as I could for all my amazing family. It’s always SO worth it 🙂  Until next time!

pinterestmail
Posted in: crafty stuff, sewing \ Tagged: , , , , , , , ,

a knitting project bag

13/10/2018 11:11 pm \ 9 Comments \

It’s sometimes quite difficult to think of gifts for Mum because she will say, without fail; please DON’T GET ME ANYTHING FOR MY BIRTHDAY.  But… I have to think of something!!!  Besides the fact that she’d probably be little bit upset if I actually did give her nothing, haha  😉

Mum is always knitting, and she’s still particularly keen on knitting socks… whenever she comes up to stay she brings her knitting, usually stuffed in some flimsy plastic shopping bag; and works on it pretty solidly, at all hours of the day or night.  And inevitably, she will ask to borrow my scissors and a wool needle… btw, I don’t mind at all hunting these things out for her, but really it would be so much better if she had them with her and at hand already.

Lightbulb moment… Mum was in urgent need of a knitting project bag!!

It’s only recently I even became aware that knitting project bags were a thing, after I discovered a few knitting podcasts on youtube… where knitting project bags are an absolute must have!  I’m a bit embarrassed to admit that my own knitting bag is just a daggy old, small shop tote thing, that shops put your purchases into… it can be seen in this post here.  It’s not very good, and Mum’s isn’t any better.

I perused Le Stash, and my hand fell on some lovely garden-green raw silk, mainly because I knew I had a matching zip in my zip stash already too.  The green silk turned out to be a pair of trousers, that Mum herself had originally give to me to use for fabric sometime.  She’d originally bought them in Italy, while on holiday, and got many years of good use out of them.  It occurred to me I could make a really good little project bag, utilising the trousers’ existing welt pockets and waistband…  bonus that this lovely fabric is boomeranging its way back to Mum in a new, and newly useful form.  Full circle! I selected some brushed tartan cotton for the bags’s lining, and inserted a new zip underneath the waistband facing inside, along with a wrist strap, so she can have the bag hanging from her wrist and still knit from it.  I think the really interesting thing about the bag though is the accessories; I added three little tabs inside, two with swivel clips, to which I attached a pair of scissors, and a pack of wool needles, and the third has a D-ring to which I’ve sewn a tape measure.  I left the original back welt pockets intact on the outside (above), so she can tuck small extra things into those pockets, things she might not want to go rattling around the inside of the bag.

I think she will have everything she needs!

I wrote a little tutorial, in case anyone reading this wishes to have a go at a similar refashion for themselves.  It’s a very useful thing for a knitter, whether for yourself or a gift for someone else, it’s easy and kinda fun to make, and I think it turned out quite cute too! In fact I would really like one for myself!

I used:

a pair of trousers with a waistband,
piece of brushed cotton for lining (around 52cm x 25cm),
stiff interfacing (52cm x 25cm)
30cm zip
2x 13mm swivel clips
1x 20mm D-ring

Extra accessories to finish; a tape measure, pair of scissors, pack of wool needles

To start with, unpick the side seams of your trousers, and cut out the seat.  Cut the waistband off at the side seams too, allowing the same seam allowance as the side seams.  Note; I then trimmed down my piece to about 52cm x 25cm (inc waistband) which made a bag with a finished measurement of approximately 20x20cm, and with a base of 20cmx8cm.

If your trousers have welt, or other pockets, that’s a bonus!  Cut a piece of lining fabric the same size and shape, using the trouser piece as a template.  If the fabric is on the floppy side, apply stiff fusible interfacing to the lining, and if your interfacing is anything like as unreliable as mine, it’s a good idea to stitch/quilt the interfacing and lining together to be sure they stay together as one layer.

Unpick and open out the lower edge of the waistband facing, and stitch up the side seams, including the waistband and waistband facing, in one continuous seam.  Stitch the lower bottom seam.  Likewise, stitch the side seam/s and bottom seam of the lining.

Determine the desired width of the bag bottom… this should be at least equivalent to, or even a bit wider than the bag opening.  I made mine 20cm.  Measure this length along the bottom edge of the bag, centred so that the excess on each side is the same.   Bring the side seam and bottom edge seam to meet, right sides together, and pin.  Determine the side edges of the base of the bag, by marking two straight lines at the end points of the bag base, perpendicular to the bottom seam.  (shown on the bag lining, below) Measure each carefully to ensure they are going to be the same length, if there are differences then adjust and re-mark until they  are equivalent.  Mine are 8cm long from pin to pin.

Stitch.  Construct the lining bag to be exactly the same.  Trim off the corners.  Pin the bag and bag lining together along the bottom side edges, wrong sides together, and stitch together along the previous stitching, ie. the short side edges of the base of the bag.

Turn the bag right sides out, so the lining bag sits inside the outer bag, attached at the base but not yet attached at the top.  You can optionally stitch the bag and bag lining together along the long bottom seam as well, however I found this to be quite fiddly…

Make the wrist strap and tabs for the bag’s accessories to hang off…  my
dimensions are:

strip 1: 8cm x 37cm
strip 2: 4cm x 10cm

Construct each as follows: fold strips in half lengthwise and press, open out and fold both raw edges in to meet the pressed centre line, press.  Fold the strip in half along the first fold line and press, topstitch close to each long edge of the strip.

Cut the narrower strip in half, giving two 5cm strips. Thread each through the closed top of a swivel clip, and baste raw edges together.   Cut 5cm off one end of the first, wider strip for the tape measure tab, thread this piece through a D-ring, baste.  Stitch the tape measure onto the D-clip.  The remainder of the wider strip will be used for the wrist strap.

Bag: open up the remainder of the waistband facing away from the waistband.  Pin the ends of the wrist strap to the waist band facing adjacent to either side of one side seam, baste in position close to the raw edge.  Take the zip, and pin each side of the zip to the waistband facing, aligning the top and bottom ends of the zip with the side seams of the bag, and ensuring the opening end of the zip is adjacent to the wrist strap, and with wrist straps folded back against the waistband facing; topstitch zips in place, stitching over the wrist straps.  Leave a gap of 1.5cm each side at the bottom end of the zip to enable the end to sit on the outside.  Trim the zip, leaving a 2-3cm tail.  Cut a small square of fabric and use it to wrap and enclose the trimmed bottom edge of the zip; fold, pin, and stitch it in place.

Open the zip; take the three previously made tabs with swivel clips and D-ring attached and pin them around the top of the lining bag, raw edges even, right sides together, and with the swivel clips/D-ring hanging down inside the lining bag.  Fold down the waistband facing enclosing the raw edge of the lining bag and top edges of the accessories tabs inside the old waistband.  Pin waistband facing back to its old position on the original waistband of the trousers.  Ensure the upper ends of the zip tape are tucked up inside the waistband, also check you are happy with the position of the tabs with swivel clips/D-ring before stitching the old waistband facing back in place.  This can be a little fiddly around the top and lower edge of the zip, but just take care and stitch as far as possible.

The final step is to clip a small packet of wool needles and pair of scissors to the swivel clips.

Aaaand, done!!!  Now, I really really want to make one for myself too!

 pinterestmail

Posted in: crafty stuff, sewing \ Tagged: , , , , , ,

a whole swag of bags (portside by grainline)

26/12/2016 11:25 pm \ 32 Comments \

I haven’t felt like blogging very much, but absolutely must otherwise I’m going to get SO far behind… it’s time to get back on the wagon.  I’ve been super busy busy BUSY, sewing up Christmas and birthday presents; including this bunch o’ stuff.

Luggage, or “travel sets’.  This was my choice for a lot of my pressies for this year.  I made three complete sets, plus four extra toiletries bags.  Everyone (said they) loved them!
Pattern; the Portside travel set by Grainline Studio.  I bought it during their Thanksgiving sale and got going on it immediately…  It’s a nice little pattern for three pieces of luggage, a duffle bag, which is quite large,  a “dopp kit” which is what we would call here a dilly bag or a toiletries bag, and a “pouch” which is a nice and handy, flat little purse-thing that you could store phone/device chargers, keys, cards, or just any small things that you don’t want getting lost as they knock about in the duffle bag.

Fabrics; all fabrics and bits and bobs are from Spotlight, except for the lining of Craig’s set, which is from Homecraft Textiles.  The shells are constructed in thick, strong nylon drill from the upholstery section, intended for use in outdoor cushions and furniture, and all pieces are interfaced with the thickest, iron-on interfacing I could find.  It stands up by itself rather nicely, and it should be nice and tough too!  I lined everything with thin, waterproof, plastic-coated fabric, so the bags can be wiped clean inside.  The interior of a dilly bag should be wipe-cleanable and waterproof in any case so your fabric doesn’t get stained and dirty from makeup/shampoo/toothpaste leakages, and I decided to use the same stuff for everything because I was thinking they all might want to sometimes use the duffle bags as gym bags, or alternately as beach bags.  I just wanted all pieces to be both practical and tough.

Tim’s; made first.  All grey/black/white, very masculine which at first I thought perfect for a professional young man.  I actually made a matching grey/white dilly bag for him to start with, then suddenly felt all that extremely tasteful grey-and-white was all a bit plain-y plain blah blah blah, and decided it desperately needed an injection of FUN somewhere… we’ve been in sore need of fun around here lately… and Tim is naturally a pretty fun-loving kinda of a guy.  When I saw this black/white Darth Vader/stormtrooper fabric in Spotlight, well it all just fell into place.  I had bought some Star Wars Lego key rings for gifts when we were in Copenhagen last year; and had some leftover, and thought C3PO made a good zip pull for Tim’s bag.

Kelly’s set is all tropical palm print.  Also fully lined with the same thin, white plastic waterproof fabric.  And may I say… if only Spotlight had had this fabric in when I was planning my raincoat! I would not have resorted to using a shower curtain.  But they didn’t. Oh Spotlight. you crazy hit-n-miss, lucky dip of a fabric store, you.

I also made a full three-piece set for Craig, for his birthday… the grey is the same as in Tim’s, and I bought a dirty camel-brown for the contrast, and a dull, air force blue webbing for the trim.  I love these sludgy colours together, this one is actually my favourite colour combination out of all the sets…  I didn’t like the thought of a white lining for this set, too stark; so went hunting for a “browner” alternative; and found this great, beige plastic at Homecraft Textiles.  Actually, Homecraft Textiles had a really great range of waterproof fabrics… I’m seriously contemplating going there to get some raincoat fabric, hmmm.

In addition; I made two more of the Star Wars dilly bags; pretty much identical to Tim’s, except for the zip pulls.  One was for Sam, and theother for Cassie’s boyfriend D.  Unfortunately I only had one more of the Star Wars key chains, R2D2, which I put on Sam’s dilly bag; I had to promise D that if we ever got to Copenhagen again I would definitely get another key chain to finish his off to perfection!

I also made a pink flamingo dilly bag for my friend P, who LOVES hot pink and wears it a lot, thus the choice of this fabric.  It’s funny, I wouldn’t have chosen this otherwise but I kinda fell in love with it while making it, and ended up utterly adoring it.  Actually, it’s been pretty hard to part with any and all of these, for real  🙂

Finally, I made a second palm frond dilly bag, for another friend, M.  She’s been so kind and sweet and generous to me all year, and I just wanted to make something for her.  The only thing I’m super ashamed of is that I ran out of time and only just finished this one on Boxing Day, so it was a little late.  Eeeeeeek!

I enjoyed making all of these.. the only difficulties I had was in getting the hardware, I cleaned my local Spotlight out of their entire supply of 25 and 35cm white and beige dress zips, 51cm white “chunky” zips, and also all their swivel clips and D-rings; completely! and had to visit Homecraft Textiles for more.  I like the plastic swivel clips a lot; I know metal ones would be more “classy” and sure I could have found some online, but I just wanted everything lightweight and easy care, and I think these plastic ones are far more practical.

Some thoughts about the pattern and its construction… it is a good pattern, it works, fills a niche, all that; but I made a few minor little upgrades/mods/changes to the way I constructed mine, which I thought were an improvement to the outcome too.

As follows…

When sewing the side edges of the duffle bag and the dilly bag; start and stop the seams 1.2cm (1/2″) from the bottom edge… doing this makes it far easier to stitch the bag bottom piece on to each.  Trust me, it really really does.

pictured here is the lower corner of a lining bag, but the same tip applies to the shell also

Also; before the stitching the lining bag to the inside of the zip tape: secure the linings to the duffle and dilly bags, between the shell and the lining bags, up the side seams and the four upper corners, as well as the bottom of each duffle bag.  This helps further to keep the lining tamed firmly in place inside the bag, and not billow inside of the bag whenever you take things out.

Zips… the bane of our existence,  no?  Never the right length… for the duffle bag the pattern calls for 53cm zips, the closest I could find here in Perth was 51cm.  To  cover up the shortfall, I made a little inset bit to slip into the end of the seam covering the bottom of the zip.  I think this looks really nice.

Likewise, the pattern calls for 33cm and 23cm zips; here they only come in 30cm and 35cm; and 20cm and 25cm.  So for the 33cm; I bought 35cm zips and just cut the bottom ends off; and for the 23cm zips, well Spotlight ran out of the colours I needed and for several of the dilly bag pocketes I had to resort to a 20cm zip instead and made similar inserts to cover the bottom edge in the same way.

I added a little tab to the bottom end of each dilly bag zip, giving you something to grab at that end when you’re zipping it up.  It’s just a short piece of the same webbing that I’d used for the duffle shoulder strap, folded in half and stitched in with the bottom of the zip.  This helps a lot when you’re closing the bag.

I also lined inside the side pockets of the duffle bag, and also the side pocket of the dilly bag. It’s just neater and nicer, and more complete that way, I think.

To line the dilly bag pocket neatly… after stitching the upper side piece to the upper zip tape, lay the lining piece right side to the wrong side of the lower zip tape as pictured below, and stitch.

Proceed as per the pattern instructions, by topstitching the lower side piece over the lower zip tape

Not a mod, just a self-evident necessity; for the dilly bag I found I had to clip the freakin’ heck out of the top pieces, to get the top to fit in to the curve of the front/sides.

stretched out to the utmost…

Now, it has to be said; the complete absence of metric measurements in the Portside pattern is pretty annoying.  When I saw this I was like, really?!  I mean, I can forgive that in a pre-70’s vintage pattern… but not in a modern day pdf, sold internationally.  It’s not a deal-breaker for me, but still, this is just not good enough.  Sure, it’s not hard for us pattern purchasers to convert all the measurements ourselves and jot them directly onto our pattern, that don’t forget, we had to print out ourselves too; but when you’re paying $14 for it… well, I just don’t think you should have to do that.

Now it looks messy…. should NOT have to do this….  

… I’ve only just noticed this; that under “gather your supplies” the list includes “sewing machine”  ;D

…  but I don’t want to end on a down note.  Overall I’m pretty happy with my decision to buy and make it, well obviously, since I’ve made so many!  Maybe I should … er, make one for me?!

SaveSavepinterestmail

Posted in: sewing, Uncategorized \ Tagged: , , , ,

all Aussie adventures

16/09/2015 12:54 pm \ 68 Comments \

MY OUTFIT IS FINISHED!!!
And I am showing it all together here for the first time.  Can I just say right here; wooooohooooot!
The challenge, as laid out by Nicki of this is moonlight, should you choose to accept it, and I did! was to make for yourself an entire outfit using ONLY locally sourced materials.  Sounds simple, right?  It has been anything but!
I’m very grateful to Nicki for conceiving this brilliant and very thought-provoking challenge, and for inviting me to take part.  This has been one exceedingly amazing ride, has blown my mind more than any other dressmaking challenge I’ve ever done, and really pushed my creativity to the limit.  At the beginning of the year I seriously did not think I would be taking my outfit to the levels I did…. I thought for sure I would be giving myself a pass on some things, for example;  thread, and allowing myself to use regular Gutermann’s thread.  As time went on though I toughened up, embraced the idea of going the whole hog; and I’m very pleased that I did manage to rise to the challenge and make the maximum possible from locally sourced products!
In fact, I’m quite proud and extremely happy! :))
For the challenge, I made:
a knitted alpaca cardigan/jacket
a merino felt dress
merino felt and pine shoes
a merino fleece bag
merino fleece undies and bra
In a nutshell, every single blinking thing I have on here is made by myself, using pretty close to 100% south-west Australian sourced materials

Those of us in Western Australia; Sue, Megan, Nicki and myself, have had to be quite innovative in our approach, I think.  I mean, forget zips, thread, elastic… there is not even any freaking fabric made in WA!  This was our single biggest hurdle, I think!
However, we are extremely fortunate in that we have wool available to us; lots and lots of wool!   Australia has the world’s biggest wool economy… did you know that 80% of the world’s apparel wool is from Australia? and Australian merino is the world’s best quality woollen fibre.  22% of the country’s wool production is here in Western Australia (source)

Hardly surprising then that all four of us have used wool as the majority component in our outfits.
My dress, bag, underwear and shoe tops are made from Western Australian merino fleece.  I made my wool felt fabric from the fleece as outlined in this post.  My dress is made from natural undyed merino fleece felt, and I hand-embroidered the fleece all over with locally handspun, undyed merino yarn.

Anigozanthos manglesii

The embroidery design is my own; a random arrangement of of kangaroo paw motif, for our Western Australian state floral emblem.

My underwear features the only “colour” in my entire outfit; I dyed the decorative yellow edging and ties using sour grass picked from my own garden, as posted here.
All the other fleece, yarn and wood in my outfit I left in its naturally coloured state.

My cardigan is alpaca yarn, from the Fibre of the Gods, a tiny mill operating on a farm in Toodyay.  This establishment produces alpaca yarn on their own property, from the fleece of their very own alpaca herd.  I bought some of their yarn directly from off the farm and knitted my cardigan, as posted here.

My wooden shoe soles are hand carved by me, using Western Australian pine.  The pine is grown by Bunnings on their own pine plantations down south and milled by Bunnings in Manjimup.  I made my shoes and my bag from my merino fleece as outlined here My bag and shoe tops are also merino fleece, with a grid pattern made of naturally black sheep yarn.

And that’s it, in a nutshell!
Well, typing it all out like this has kinda brought it home to me for the first time; I am wearing a pretty-close-to 100% homegrown outfit, top to toe, for maybe the first time in my life!  I’m kinda amazed, even at myself.  It’s a little mind-blowing to me.
Final thoughts: I’ve learnt a tonne doing this challenge.  Firstly, our local industries are precious and need our support.  That goes for everywhere, not just here in WA!  I personally am going to put more effort into supporting our local products regularly.  I mean, I’m definitely not giving up my more “regular” sewing, but I am going to do this challenge again.
Secondly, that if you really put your mind towards doing something, keep yourself focused on getting a project done, to overcoming obstacles, then you probably can do it.  Sometimes you need to sleep on it, think outside the box a bit.  I learnt a lot as I was going along, and several times had to improvise a solution to a problem.  There were moments when I questioned my sanity in doing this, when I wondered if my ideas were even going to work… a felt dress? unlined? felt underwear? sounds like the vision of a lunatic, or at least a recipe for disaster, for sure… well OK even I can admit that felt underwear is not really a practical nor a workable thing!  … do NOT recommend.  😉
Also, I had lots of fun!! I LOVE a challenge and this challenge really stretched my capabilities; which is the very best sort of challenge, in my opinion!   I thought hard and long about each aspect of my outfut and tried very hard to honour the materials, to minimise my waste and to make something truly Western Australian in feel and flavour as well as provenance.
There were also moments when I realised I had to accept a small defeat; in the case of this outfit; the glue holding pieces of wood together in my shoes (from NSW, Australia), the nails holding the felt to the soles of my shoes (China) and the cotton jersey liner for my undies (China).  They are very tiny elements so I’m not going to beat myself up over them too much.
I guess the important thing is that I gave everything careful consideration,  and really thought about provenance and the possibility of substituting local products in as many instances as I was able.  As well, I wanted to produce something stylish and lovely, that I knew I would love wearing and feel proud and happy in.  I genuinely love my outfit, and feel pretty pleased with my efforts!
Lastly; maybe I’m on a bit of a post-challenge high, but I’m quite excited about attempting this again next year… in fact I already have ideas and plans!
Mad? maybe, but quite happy to be so!

Details:
Cardigan; the Caramel cardigan, in Fibre of the Gods natural alpaca, grown, shorn, washed, carded and spun in Toodyay, Western Australia and hand-knitted by me, details here
Dress; my own design based upon Burda 8511, made from merino felt made by me and hand embroidered with locally handspun merino yarn from Bilby Yarns, details here
Shoes; my own design, pine soles from Bunnings hand carved by me, felt tops made by me from merino fleece bought at Bilby Yarns, details here
Bag; my own design, in felt made by me from merino fleece bought at Bilby Yarns, details here
Underwear; my own design, knickers derived from the Tried & True knickers pattern by the Makers Journal, in felt made from merino fleece bought at Bilby Yarns, details here

pinterestmail

Posted in: fashion, knitting, sewing, shoes \ Tagged: , , , , , , , , , , ,

I made matching shoes and bag

06/09/2015 8:51 am \ 55 Comments \

I’ve finished the next coupla components in my 1 year 1 outfit project!
First up; shoes!
Following the same formula that I used for my previous two pairs of shoes; these have a carved wooden base and a fabric top.  For the soles I used Western Australian pine from Bunnings.
I actually had several pieces of wood from which to choose for this project; my Dad had given me some marri from their block; and I also, albeit briefly, considered jarrah as another truly Western Australian product.   Also, my brother had given me some jacaranda logs from when he had to lop a branch from the tree in their back yard.  But I eventually decided to go with pine … why?  Well it’s the softest, lightest and easiest to work with! and our ancient old bandsaw has finally given out, meaning it was going to be a ginormous struggle to cut the marri or jacaranda or jarrah either on any of our other equipment. These are all pretty rock hard woods, also both marri and jarrah weigh a tonne and you’d only want very thin soles of it for a shoe.  Pine was the path of least resistance.  I have definitely not ruled out using the other wood that I have for future pairs of shoes though.  I just need to get better at woodworking first  🙂

personalised soles  🙂

Craig helped me with the big cutting and I did the finer shaping using the belt sander, and hand-sanding out the heel groove and some grooves for the ball of my feet.  I also carved my initials, just for fun  🙂
The upper is 100% Western Australian Merino wool felt; made from natural, undyed, white fleece and natural, undyed, handspun black sheep’s wool as outlined in this post.  By the way; I incorrectly stated in my previous post on my dress that the wool I used for the felt was Corriedale, and I have since discovered that it was pure Merino wool, sorry!  I’ve corrected the error in that post now.  And am actually rather thrilled to be wrong, to be honest!
Anyway my black and white “plaid” was the thickest and strongest of the felts that I made, so I kept it for these more demanding of my outfit components.  Sadly, I realised that it’s still not particularly sturdy and is probably going to stretch out pretty quickly  :((  But I’ve devised a devious plan to cope with the inevitability of The Stretch, mwahahahaha… see that central seam running right down the top/middle? well as it stretches out I can just unpick it, cinch in the top seam a bit, trim and re-stitch.  Simple!  And when it has stretched out past the point of saving, which it will; then I can easily unscrew the screws from the sides, remove the whole felt top and substitute something sturdier like leather.  Hopefully I can somehow find a nice piece of thick WA leather, so that my shoes will still be eligible as a 1 year 1 outfit piece!

OK: confession time… I did have to cheat on a few minor parts of this project; the glue holding the pine layers together is made in NSW, and the screws holding the felt upper to the wooden soles are made in *embarrassed whisper* China.  I did investigate making these; and concluded that to make my own local glue and “nails” is both possible and achievable.  You can make your own glue using boiled animal bones, sap, or milk and vinegar; and I could have made wooden “nails” using jarrah or pine dowel.  And originally I was seriously gung-ho about doing just that; until my Dad and my husband advised me to get real.

You see, the wooden soles are honestly such a hugely time-consuming and difficult component for me to make that I really really wanted them to hold together firm and fast and be perfectly secure; and NOT EVER fall apart.  A rank woodworking beginner like me could all-too-easily destroy my carefully hand carved soles trying to ram wooden dowel “nails”, with hot homemade glue dripping everywhere; and even then if I was miraculously successful; they could later on just fall out or snap at a moment’s notice.  Which, according to my experienced father and my husband; is pretty darn likely.
And I would, um, yeah; be sad.  Understatement of the year, right there.
Anyway, I went the route of properly manufactured wood glue and steel screws…  but I just want to say, for the record, that I did investigate the 100% hardcore approach, and gave it serious and careful thought.
And I do not regret not going there either, not one little bit, sorry!  You can only do so much!
What is more! I will also be gluing some thick rubber to the soles to protect them from damage.  I haven’t done that yet, I plan to “show” them first in this virginal state.  But I will.

Exhibit two; a bag!

And it perfectly matches my shoes, hehe.  Isn’t that the old fashion must-do advice for a lady from the 50’s or something? I seem to remember reading somewhere that a lady would never dream of sashaying out with non-matching shoes and bag.  Ancient stuff, I know; we definitely do not adhere to such a strict dress code anymore!  But I had enough felt for it so here I am, totally regressing to the standards of a previous era.
ooo yea.
It’s just a simple, um, something-bag?   A sort of rustic briefcase?  I don’t know the correct term to describe this kind of bag.  A fold-over, almost-envelope, with rectangular side gusset thingies to make it box-like.  It’s all held together and decorated with blanket stitch.  For the handhold; I cut and blanket-stitch edged three slits that line up with each other through all layers.  Ta da!  Simple, but it does the trick.

I like the way the felt is thick enough that it can stand up by itself… just.
I am toying with a few extra components for my 1year1outfit project, but minor things that may or may not come to anything.  However, they may; fingers crossed.  If all else fails, at least I do have a complete outfit now!

pinterestmail

Posted in: fashion, sewing, shoes, Uncategorized \ Tagged: , , , , , ,
Switch to mobile version
↓