Tag Archives: Pattern Review

khaki Tosti jacket

sidewaffle tostiHello!
For ages I’ve wanted to replace my old beloved khaki ripstop army-style jacket… I LOVED that thing and even did a 6 different ways post on it once.  At some point I decided I’d made the sleeves just a smidgeon too short so with some sadness passed it on to Cassie.  Who loves it equally, and wears it often… and I found myself pining for it all over again whenever I saw her wearing it!

Finally I’ve got around to making another one for ME!

tosti frontI just adore jackets with tonnes of hardware and detailing, like zips and lots of different bits and bobs and interesting pockets.  So set about planning for this one to be chockablock with loads of that sort of thing.  I considered using the same Burda pattern I used for the previous one, but I had to make lots of additions/adjustments to that in order to make it the complex, feature-laden army-style jacket that I wanted, which is fine! but since making that one, lots of great patterns have popped up with all those features already incorporated into the pattern.  Eventually I settled upon the Tosti utility coat pattern by Yuki of Waffle Patterns, it had the detachable hood, the belt, tabs, the front zip placket for a separating zip, multitudes of pockets, in fact: everything I wanted.  I was really attracted to the variety of different pockets it had and was pretty determined to use each and every one of them in my jacket.  There are six different types of pockets!   an inner breast pocket, a sleeve pocket, two options for breast pockets and two options for hip pockets, and I used ’em all.  Cassie thought I was loopy putting four different pockets on the front of the jacket, but I stubbornly ploughed ahead because I love that mishmash look…   I know you’re not supposed to do ALL of them with the pattern, but I just wanted it!

Beware; pocket overload approaching…

 

Breast pockets:(L) inner welt pocket with flap; and (R) inner pocket with exposed zip closure

tosti pocketAtosti pocketB

Hip pockets; (L) bellows pocket with patch flap; and (R) patch pocket with exposed zip closure

tosti pocketC tosti pocketD

(left) patched sleeve pocket with exposed zip closure; and (right) inner breast pocket with double welt

tostipocketE tostipocketF

The fabrics: the khaki cotton ripstop was from some online fabric store in the US; and I can’t remember its name, sorry!  My neighbour Meggipeg and I went in together with a joint order.  The fabric was priced reasonably, but postage was horrendously and shockingly expensive… the trap!!… but at least I got the ripstop so that’s ok.  One of the saddest things ever is when Spotlight ceased stocking this stuff  *sob*

The plaid cotton flannelette I used for lining and all zips were from Spotlight, and I had to visit two stores to find them all! and the copper press studs were from both KnitWit and Spotlight  Yes, I had to visit a coupla stores to get enough of those too!  The belt buckle was harvested from an old belt.  Originally, I had decided I would put thin black fleece interlining in my jacket for some warmth, but once I had the lining made up I realised I wouldn’t need it.  The jacket is pretty warm enough already, and truthfully, if it was any warmer it actually wouldn’t be all that useful in our climate.

front tosti

back tostiThere is tonnes of topstitching all over, so satisfied that part of me that adores precision sewing.  I’m that weirdo that LOVES topstitching! and am pretty much totally and blissfully happy when I’m hunched over the machine, chugging along; churning out lines upon lines of precise, neatly and evenly spaced, stitching.  The wonderful thing about this ripstop is that the little squares in the weave of the fabric make precision stitching and lining up pieces to be perfectly square very very easy.

(L) belt loop; (R) shoulder tab.  Press studs from kits bought in KnitWit and Spotlight

tosti belt loop shoulder tabs

(L) collar with press studs for hood, (R) wrist tabs

tosti collar wrist tabs

No one  will ever see or notice this but me, but the plaid lining matches up all the way around #patternmatchingfreak

The lining appears a bit “blowsy” in this picture, due extra ease in the lining… many of the lining/shell seams have you make folds/pleats in the lining when stitching the lining to the shell, to account for the extra length.

lining

I’d cut a plaid lining for the hood too but decided upon a self-lined hood.  Less jarring in appearance when the hood is worn down.  Which, let’s face it, it most usually is!

Opening zip, and placket with press studs; (below) self-lined hood

tosti zip plackethood1

hood

I also made the belt, using a buckle harvested from off an old belt of Tim’s, and eyelets from a kit from Spotlight

belt

I posted lots of these progress pictures on instagram also, so I’m sorry for the doubling up.  But; you know instagram; it’s fabulous and I love it, but stuff gets “lost” in no time there since it’s not that easy going back to see things you posted a year ago…so I’m reproducing all those pictures here.  I know a lot of us seamsters have migrated pretty solidly to instagram now; in fact it seems fewer and fewer people are reading blogs and it could be that blogging like this is dead or at least heading towards comatose.  I mean, let’s be honest, how many people actually click over when you see the words “on the blog now, link in profile”?   Precious few… and that’s just the way of things, times change, people now are of the moment and often are only interested in one quick visual; and that’s all absolutely fine and ok and completely understandable.   I think though that I will still keep on with writing this blog anyway, just for my own benefit.  I want to keep going for the same reasons I started it; as a record of all my sewing projects, because I can search for and look up older things up here, and you can’t really do that over on instagram all that easily.

Hmmm, well that was a bit of a diversion there, sorry!  I’m writing a review of this pattern, but no point in reading it really.  It’s pretty glowing, because I absolutely LOVE this pattern; I thoroughly enjoyed making my jacket, and am totally enamoured of the final product.  Fair dinkum; I’m going to wear this to rags.

back1

Fun fact; after a week of FREEZING cold weather.. today, the day after I finished this jacket and wanted to wear it for the first time; of course today was then an unseasonably warm day.  Naturally!!  But you know what? I wore it anyway, mwahahaha.  Unco-operative weather! pfffft!  see what I care!  I wore it, and I roasted.  And I loved every minute of it!!

Details:

Jacket; the Tosti utility jacket by Waffle patterns, khaki cotton ripstop with plaid, brushed cotton lining
striped Tshirt; self drafted, details here
Skirt; Vogue 1247, cotton corduroy, originally yellow and dyed brown, details here
Tights, self-drafted, black stretch, details here
Shoes; made by me, details here

ootd

pinterestmail

sophie swimsuit

grey sophie frontccf sophieI was thrilled when Heather of Closet Case Files asked me to test her fabulous new swimsuit pattern, the Sophie swimsuit, named after the elegant and tres creative Sophie, of Ada Spragg. Thanks so much Heather!  I’m pretty chuffed that she continues to even notice an old hag like me.

The Sophie swimsuit is a structured bikini top optionally underwired and paired with high-waisted bottoms, or alternatively the same structured cup top as part of a one piece, boy-legged suit.  I think it’s classy, with a modest retro-style chic, and it’s a beautifully designed and drafted pattern.

I’m also enormously impressed, not merely with the Sophie pattern although that in itself is pretty damn fantastic effort because it’s quite a complex pattern…  in addition to that Heather is offering a package deal;  the pattern, swimsuit kits with fabric, lining and all the bits and bobs you need to put it together, AND an online workshop; all designed to take the legwork out of tracking down all those bits and pieces you need, and to ease newcomers to swimwear-sewing painlessly into the whole process. It’s an absolutely brilliant effort.

Anyway, so this is me, modelling my two new bikinis on the delightfully sunny beaches of south-western Australia…  HA!  Obviously it’s the middle of winter here, and while it really was a beautifully sunny day and was actually quite pleasant out of the wind in the shelter of the rocks, where I am in the top picture; on the beach itself it was just a tad chilly mind you, just a teeny tiny tad… (read; utterly freezing)

sophie swimsuit backDid I dive right into that invitingly turquoise water for a frolicsome dip?  NO!!!!  Since I’m the wussiest wuss that ever wussed I just got my pictures super fast and then threw on my jeans and thick woollen cardi again pretty quick!    You can see that turbulent water and my crazy hair, it was blowing a freaking gale and the waves were booming and thundering onto the sand like the proverbial white stallions.  I do love the beach in any and all weather, including wintery and wild; I love the sparkle of sunlight on the water, the swirling foamy shallows, and the crashing of the surf.   Well, perhaps more so when I’m warmly rugged up snug as a bug in a rug, of course.  Sienna loves the beach too, but it’s alright for her, in her thick fur coat!  hehe, the things we do…

Anyway, on to the SophieS; yup, I’ve made two… both bikinis.  It’s been an awfully long time since I’ve worn a bikini, eeek!  but I chose view B because I’m still more of a two-piece bathers person than a one-piece-r.    There’s the charcoal version at top, and also the pink/black colour blocked version, which was made first.  Tester driven feedback called for a change in the shape of the cup so the second, charcoal, one is closer to the final version of the pattern.

Also; I should mention that in the final version of the pattern, the bikini bottoms have a slightly higher rise than mine do here, sitting just at/slightly above the natural waist.

sophie topsIt’s funny; when I finished the pink/black one I almost immediately took a violent dislike to the colours I’d chosen…   It seemed a bit… I dunno, young and sporty? or something.  Then I made the charcoal version.  Which I really adore.  When I took out the pink/black one again, to take photos in it, of course, you know the story, it didn’t look quite so hideous after all.  I actually took quite a shine to it again.  The pink seemed a bit warmer and less Barbie than I’d remembered it.  I decided I might even like it better than the charcoal one.  I don’t know.  Oooh, I’m torn!  Either way, I expect both are going to get worn this summer  🙂

sophieHeather has introduced her own sizing chart for the pattern, which I think is a pretty good idea.  You know, when you’re making something and you sometimes get too lazy or too cold  to disrobe for proper measurements, and go with the same size you always take, or worse; what you think you are.  I do find that when faced with an unfamiliar sizing chart, you’re more inclined to get out the tape measure and do a properly slow and careful remeasure, to determine your correct size.  Which I did.  So saying that, how do I feel the cups fit?  well they both fit pretty good.  Though I do feel like the cup on my charcoal one, while it fits me;  is just a smidge on the scant side for my tastes, if that makes any sense.  I believe Heather has upsized them on the final version, which I reckon is a good call.  I am small up top but I still kinda like to have lots of coverage there, for personal preference.  I might remake the charcoal bikini top, following the new sizing of the final version of the pattern.  But maybe not ’til summer!

grey sophie backFabrics and bits and bobs: the fabrics are from Fabulous Fabrics; who do get some very nice swimwear fabrics in stock during the season.  I bought all these fabrics in previous summers, stocking up during sales.  Stashing strategically, as you do  😉  Other supplies from my fast dwindling MakeBra basic kits; the underwires, under wiring channeling and the foam for the cups.  The swimwear elastic, plastic swimwear hooks for the straps and back closures are from Spotlight.

sophie swimsuit

pinterestmail

little white tank

hunter tank top front
hunter tankI’ve made this new top! rather cute and feminine with a sweet little tie front at the waist. Yes, it’s linen, it’s plain, and it’s white.  I just can’t help it, I’m a diehard white or off-white top kind of a girl… I’ve got stacks of them and keep on piling new ones in t the ol’ wardrobe because I never have quite the right one, and always feel like I could use just a few more, in different styles and fabrics.   Also; white fabrics; honestly, sign me up for the Addicted t
o White Fabric club, asap!  Every time I sort through my fabric stash I say to my husband and to Cassie; please, DO NOT let me buy white fabric, ever again!!!  I think I have enough to last me a lifetime of sewing nothing but white or at least off-white or ivory or just plain pale clothing for myself… and yet,when making something I find I never have that just-right type and find it necessary to head out to the fabric store to search for it…. aaaagh!  I’m going to the fabric store later today, just to buy elastic and am steeling myself to Stay Away from the fabric area… *giving myself a stern talking to*
This particular fabric is fine-grade handkerchief linen; a long term resident from my stash thank goodness.  Provenance long forgotten, ahem.

The pattern; so, recently I was contacted by Jen, of Jennifer Lauren Handmade, who asked me to review her latest pattern the Hunter tank top, and this is it!  Cute, non?  I reckon so.  Mine is view 2, with the skinnier shoulders.

hunter tank top back
It’s a simple and rather classic design, with that front tie feature to distinguish itself; all cut on the bias and with centre front and back seams because there is a bit of shaping in it.  I LOVE the teeny little breast pocket on it! so very cute! not that I’ll ever be putting anything in it but it’s a sweet decorative touch; which I reckon a plain white tank top NEEDS.

DSC_0017

I followed the instructions, which are very thorough btw; and aimed at someone who knows how to sew but is still relatively new to making clothes.  I did the French seams and flat-felled seams where indicated throughout, and one of those super skinny hems at the bottom that look really nice in linen, made by stitching three times.  So, it’s rather beautifully finished.  That’s something else about very plain and basic items; they really should be finished well in order to stay the distance.  I took my time and made sure I did, even to the point of unpicking several bits and doing them over.

you could probably wear it untied too, looks kinda dramatic

hunter tank top untied

Thoughts; it’s a lovely classic design with very good bones, and a lovely fit and drape, thanks to the bias cut and subtle shaping through the centre seams.  I think the design does need fabric that has a bit of “grab” to it for that tie to stay tied up.  My linen does, but it does tend to loosen over time too, so I think in a soft, slinky, slippery fabric like crepe de chine the tie might slip out pretty quick if you didn’t anchor it somehow.

hunter tank top side

It is quite short, designed to sit at the natural waist, so is very nice to wear with a high-waisted skirt or jeans.  I have a few things that fit the bill, so yay!  I’m also planning to make it lengthened a bit by next summer and without the tie-feature, to wear with some of my more low-slung things as well.  Actually, lengthened possibly even to dress length!  while making this one I was already hatching plans for a tank dress using this pattern… mwahaha.

NOT a white one!

hunter tankvogue2894

Details:

Top. the Hunter tank top by Jennifer Lauren Handmade, white linen
Skirt; Vogue 2894, red floral cotton, lined with purple cotton, details here
Shoes; made by me, details here

hunter tank top

pinterestmail

Morgan boyfriend jeans

ootd

morgan jeansI’ve made some boyfriend jeans!  Hehe, I actually made these aaaaaaaages ago! and have been dying for the pattern release, just so I can wear them more often.  They’re so comfy and easy to wear,  they’re my current favourites.   I really really love them  🙂
morganjeans side

Pattern; the Morgan jeans by Closet Case patterns, named for the lovely Morgan of crab and bee.  They are a mid-rise, button-flied, slightly cropped leg jean with a skim-the-body fit *deep breath*  Wow, there are so many descriptors attached to jeans now, yeah?  Jeans are no longer just “jeans” but there are so many defining clarifications that come with each style.  These are quite different from any of the jeans I have made before in shape and fit, but of course they are still “just jeans” in the sense that they have all the features of jeans beloved to us all, like the 5-pockets for example.  Heather kindly asked me to test the pattern, and this is my first go, off the bat.   Apparently the leg has been widened slightly since I made these.

morgan jeans frontFabric; these are designed for a non-stretch denim, so I found a nice, crisp, deep dark charcoal cotton denim, mid weight and with absolutely zero stretch to it in Spotlight.  No stretch, and the jeans still feel fantastic! I also used coppery-brown Guttermann’s upholstery thread for the topstitching, and copper-y coloured jeans buttons, all from Spotlight.  The grey cotton for the pockets and waistband lining is the same fabric as my grey gardens dress (Fabulous Fabrics).

My first button fly!  I wasn’t sure if I’d like it at first, I thought it would be bulky; but now I’ve got it and have worn it a few days, I realised my fears were unfounded, and I really do like it.  Also, it’s nice to have something a bit different, yeah?

fly

Pockets, with lots coppery/brown topstitching  #topstitchingporn

pocket

Leather patch on the back.  I cut this from one of the last scraps of leftovers from my Danish suede jacket.  I forgot to add it at first, doh! but it does make them look just a little more ready-to-wear, no?

Alterations: initially that waistband was quite gape-y in the small of my back, a usual thing for me.  I’m quite hippy, I suppose!  so I took in several inches off the waist at the centre back, tapering out in a straight line out to the hips.  And shortened the waistband at centre back, correspondingly.   This is my usual adjustment to fix that problem for me, and worked just fine for these too.  I didn’t alter the position of the pockets, so on my jeans they are situated a little closer and more slanted inwards to the centre back seam than the pattern intended, but I thought they looked ok and didn’t need moving.

hadn’t added the patch at this stage…

back

I love how they look rolled up a coupa rolls, this makes them three quarter on me and I really love this, a little bit 50’s capri pant-like. I love how they show off a pair of little lace-up shoes.  Hehe it’s probably a bit obvious from my shoe-making efforts that I’m SO right into the flat lace-ups at the mo!   btw, those red sandshoes in my beach pictures below? are fully dead now, (sob)  I’m pretty sad about that, I thought they were cute. #needmoreredshoes

Top picture is my current outfit of the day… I actually put on something else first thing today, inwardly wanting to wear my Morgan jeans and moaning once again that I couldn’t yet, because you know, the Reveal and all.  And then I saw on IG that Heather had released the pattern.  So I could wear them, yay!  Other outfit sloughed and abandoned, Morgan jeans donned with joy and delight  🙂

This style is perfect for the weather we are getting right now; which is starting to get a little crisp in the morning but still quite warm during the day and not cold enough yet for socks!  Not too hot, not too cold, but just right.  These are going to get worn a tonne …

Details:

Jeans; Morgan jeans by Closet Case patterns, non-stretchy cotton denim
Top, (white) loose drapey top from drape drape by Hisako Sato, cotton jersey, details here  (black) self-drafted Tshirt, details here
Raincoat (top picture); made by me, self-drafted, details here
Shoes; red sandshoes (below), made by me here, yellow shoes (top picture), made by me here

morganjeans

pinterestmail

Martha goes Impressionist

tatb marthaI’ve made a new dress for Cassie! does’t she look swish and smart and ultra-glam?  Well, I reckon so  🙂

Pattern; the Martha dress, from Tilly and the Buttons.  I was recently contacted by Joanne from Tilly and the Buttons and asked if I would review the pattern, and I was like, an excuse to sew? hells yeah!!   I thought the dress would look really nice on Cassie.  And it does!

Fabric; a medium/heavyweight jacquard, quite lustrous and with a rich subtle sheen to it; in a weave of pewter grey/ navy blue/ mauve threads.  It makes me think of moonlight reflections upon water.  Although when I asked the family for naming suggestions, Cassie suggested corroded steel, and Craig suggested concrete cancer.  Oh nice.  Very poetic; yeah thanks, family!

Origins; well a week or so ago; I went down to my parents’ place ostensibly to help Mum to clean out a room of “stuff”.  Obviously that meant that I came home with a large chunk of that stuff.  To be added to my own ever-growing pile of stuff that itself needs a good going-through.  *sigh*  So I have a few more bins of fabric at my disposal  *double sigh*  More fabric!  oh woe is me  😉  Anyway, this particular piece caught my eye as being a great candidate for the dress.  It’s stiff enough to cope with all the shaped seaming going on in the bodice of this design, and also gives a beautiful twirly flare to that full skirt.

in full twirl mode!

martha twirl

I didn’t have much of it, plus it had that directional, woven-in pattern, so I cut out the skirt pieces on the grain rather than on the bias as recommended in the pattern.  I think it’s absolutely fine on the grain.  And even with the more economical layout, I just barely had enough fabric to cut out the pieces.  I have the merest scant handful of scrappiest scraps left…  I reeeeeeeally wanted the knee-length skirt rather than the mini, so I was so pleased that I could squeak those out!

Sizing; Cassie’s measurements correspond to a 2, so I cut out the 3 and custom fit to her through all those bodice seams.  The bodice ended up pretty close to a 2 after all, apart from the lower back princess seams, which got taken in a good deal more, so the waist is more like a 1.  The skirt pieces were tapered out along the side and princess seams to the 3 at the hemline; so the skirt is a tad more “flared out” than the pattern stipulates.  Hey, the more flare the better, right?

I was a little wary of the Mandarin collar; I just knew it wouldn’t go with Cassie’s style, so left that off.  My first plans for the neckline were to eventually cut away the shoulder/top edge to be a more boat neckline sort of a shape, which is a universally flattering neckline in anything, in my opinion… but during bodice fitting it was still as is, no cutting, and Cassie got to a point where she hated the highness of the neckline and pretty much threatened that she would not wear it.  Aiyiyiyiyi!  I promised her that she would love it by the time I had finished, but even I myself, by that time, was starting to think a high neck, even in a lovely boat line; would still not really work for this particle print …. the print was too busy? neck-to-knee it would all be a bit overwhelming? whatever the reason I could sense disaster looming on the horizon.

Anyway I had a brainwave… I suddenly thought of putting in that long front slit.  I did it without consulting her, and just messaged her a picture of it while she was at work, and she immediately texted back enthusiastic approval.  Phew!!!  Saved!

neckline

I’d cut neckline facings from grey cotton leftovers, drew on a centrally placed line for the slit and stitched the facings on, carefully skimming around that line.  I then cut the slit, under stitched all around the neckline including the slit edges, and turned the facing inside.  On the outside it is stitched down by “stitching in the ditch” invisibly along the shoulder seams and also along those princess seams.  Seen in the picture as a navy blue line of stitching each side of the facing there, since I couldn’t be bothered changing the navy blue in the bobbin for pale grey, hehehe.

neckline inside

What other mods… oh I also added inseam side pockets… well of course! I’m sorry to bang on about pockets all the time like I do; but pockets, if at all possible, are just a must-have in my opinion!  I cut these from more scraps of grey cotton.

OK, so that’s that!  Cassie absolutely loves it, and I do too.  I even think it has Veronika Maine or Cue vibes to it; which is a very good thing.  These are two of my favourite Australian clothing labels, and if I was to ever decide to buy clothes ever again I would be popping in there like a shot.   Heck, sometimes still I do, just to get inspiration!

I’ve even done a “proper” pattern review, below.  How long has it been since I got all official like that? ages, that’s what!

Pattern Description: the Martha dress is fitted with bust darts and gentle princess seam panels at the bodice, flowing into a bias-cut panelled skirt.  It features a contemporary Mandarin collar and closes with an visible zip at the back.  Choose from short sleeves or three quarter bell sleeves, with knee length or mini hemline.

Pattern Sizing; 1-8.  This is a new-to-me pattern company, with new-to-me sizing, and so I like to size up for the first thing, just in case!  My daughter’s measurements correspond to the size 2 so I cut out a 3 and then custom-fitted to her through the side seams and those handily situated princess seams.  It ended up being whittled back down to the expected size 2.

Did it look like the photo/drawing on the pattern envelope once you had finished sewing it? in essence I think it does, although I made a few design alterations and my fabric choice is very different from the recommended so there’s that too.  Actually, I think my heavier weight fabric makes the biggest difference.

Were the instructions easy to follow?  very easy!  The pattern envelope says it’s suitable for “Improvers” which I thought was cute!  I’ve been sewing for a long long (long) time, but I’m sure I still have room for improvement  😉

What did you particularly like/dislike about the pattern?  I think the pattern is absolutely fine… though I did make several modifications to fit personal taste.  I particularly like the swingy, flared gored skirt, it sits out beautifully in the stiffer full-bodied fabric and twirls gorgeously.  Not that Cassie does a heap of twirling! but still  🙂  I wasn’t so sure about the Mandarin collar, and neither was Cassie so I finagled something else instead, but that’s purely a matter of taste and not a fault of the pattern.  I can see the mandarin collar is perfectly well-drafted and I would consider using it in a different design, like, say, with a sheath dress.

Fabric used; a medium/heavyweight, semi-glossy jacquard that has some body but is still reasonably flow-y  The pattern recommends lightweight fabrics like crepe de chine and lawn, but I really think all those fitting seams in the bodice and the 6-gored skirt could really benefit from a thicker weightier fabric

Pattern alterations of any design changes you made;  I left off the sleeves completely; instead I scooped out the armscye by a bit and finished the edges with grey cotton bias-binding, under-stitched, turned inside and hand-stitched invisibly in place.
My fabric has a directional, woven-in design; so to save the visual integrity of that, I cut out the skirt pieces on the grain rather than on the bias as recommended in the pattern.  I think this is a perfectly doable option for this design.  Plus, you will save fabric!
I also left off the mandarin collar…the neckline I cut a little lower both front and back and finished with a facing, cut from the same grey cotton.  The centre front of the neckline has a long, faced slit.
I also added in-seam side pockets.

Would you sew it again?  Would you recommend it to others?  I probably will sew it again one day, using some of the other sleeve/length variations.  It’s a nice, simple and classic design, which with the right fabric could be put to use as anything from a work-dress suitable for the office to a party dress.

Conclusion: A successful outcome!  After some tense earlier moments during the fitting before I’d sewn in the bodice slit yet and she declared that she wasn’t going to wear it, my daughter was thrilled with it in the end and is planning to wear it to work as well as to dressier, evening-out events! An honour, if not a relief for the maker (me) indeed  🙂

Disclaimer; this pattern was given to me by Tilly and the Buttons for my honest review.  All opinions are most definitely my own.  There are no affiliate links on my blog and never will be; I am in it because I love sewing  🙂

pinterestmail

dark chocolate suedette

sideIMG_7763burdastop
I’ve made a new little top.  And I’m so happy with it in my outfit! far more than I thought I would be  🙂  Making the little top was almost a spur of the moment thing… see, I’m going out tonight and a few days ago suddenly started to think seriously; what smart/casual outfit with shoes would fit my Year of Handmade?  I’ve got tonnes of lovely dresses but didn’t think any of my current handmade shoes would cut the smart/casual mustard with any of them… aaah first world problems!  anyway long story short; bit of brainstorming later and dreamt up this outfit.  Had the skirt and the shoes already and just needed the top to pull it all together and be the icing on the cake… or should that be the chocolate topping on the cream?  Probably.

 

DSC_2668

The neutral colours with a variety of textures in my outfit are very pleasing to me: the suede-y deep chocolate brown vs. smooth glossy creamy-ivory satin skirt, vs softy fluffy chocolate and ivory felt in my shoes.  And smooth pine for the base of my shoes.  I feel rather modern and new-age cool.   Almost trendy.  LOL!  Yeah, funny thing; it’s been a long while since I’ve felt this sharp in my handmade clothing!!.

The fabric in my top is faux suede, from the Fabric Store in Melbourne, bought during a trip there with Mum and Cassie.  I have loads left too… not a bad thing since it’s kinda gorgeous!

back

Pattern; Crop Top 127, from Burda magazine 2/2015.  It’s quite a cute little design, boxy with lots of straight choppy lines long and dramatic diagonal darts at the front and boxy angular sleeve seams.  And then the smooth curve of a high-low hemline to break it up.  The bias-finished armholes and neckline are clean and neat.  I do like a bias finished edge!  I used black cotton for this since I didn’t have any chocolate brown.  The top as per the magazine is completely open at the back! instead I chose to seam mine, leaving a slit with a little button and loop closure at the top.  I covered my embroidery cotton loop with tightly spaced blanket stitching along its length, so it’s strong and neatly finished.

details

Adjustments; the pattern is in petite sizes, and in the past I’ve found that the Burda petite bustline sits just a little high on me … I lowered mine very slightly just by making the dart shorter.  I also added 6cm in length to the bottom hem all round, because it looked like it was going to be a tad on the too short side.  And I’m so glad I did!!!  It would have been waaaaaaaaaay too short on me!   Even at this lengthened version, I feel in constant danger of exposing the underthings.  Have to be careful not to lift my arm up too high!  I’m wearing my mocha Sierra bra though, which I  think is a good fit for this expose-errific top… why? because it’s brown, and quite a longline bra and also since I made it very very plain it actually reads more like a cropped camisole than a bra, if anyone happened to glimpse it.  So I’m glad I’ve got that already too.  Honestly, everything in the outfit matches just like they were all made intentionally to go together.  I feel very harmonious  🙂

Smart casual outfit? that pleases me? fully handmade? Tick, tick, and tick!

Details:

Top; Burda magazine 2/2015; 127, chocolate brown suedette
Skirt; Burda magazine 02/2014; 106; cream satin, details here
Shoes; handmade by me in wool felt and pinewood, details here

fulllength

pinterestmail

world, meet Sally. Sally; world.

DSC_2629Hello there.  I’m Sally  🙂

Well, it’s been a long time since I’ve indulged in making something like a doll and doll’s clothes but omigosh, this was SO MUCH FUN.  Honestly I think I’m just about to explode with the exquisite fun-ness of it all!  I’m still on a bit of a high.  All those cute teeny little bits and pieces.  Quick as a snap, with barely any fussy finishing details.  My inner child has been squealing fit to burst, here.

DSC_2650So, my Mum took me to to Calico and Ivy for my belated birthday present; and we chose this book The Making of a Rag Doll, by Jess Brown, and a little stack of fat quarters.  I know, right? I’m so lucky:  FABULOUS birthday present!  This was on Thursday and I finished this lot last night, so obviously I just could not wait to immediately get stuck into making my doll.

IMG_8786

LOOK HOW CUTE OMG I CAN’T STAND IT

DSC_2651 2

So I’ve named her Sally, and she has a complete summer and winter wardrobe.  I’ve made for her everything from the book, bar the patchwork quilt.  I might make the patchwork quilt too, well… everyone needs a little bed on which to rest our weary red head, non?!!!  but in the meantime I want to do something else with the leftover pieces of fat quarters and I’ll wait until I’ve finished that before assessing my scraps for the quilt.

WARNING: NSFW, the following picture depicts nudity, do not proceed if a naked body causes offence to your eyes… bwahahahaha!  I’ve always wanted to say that in a blog post! gawd so juvenile. *eyeroll at self*

 

IMG_8777

I made my doll as per the book, but did my own face and hair design.  I liked the face in the book but Craig reckoned it was a bit creepy … apologies to Jess Brown!  Anyway I tried to make a face as sweet as possible, a fairly unsophisticated and simple design.  I left her hair until last because I thought it would be the hardest bit and I was a little unsure about how to do it.  The book has you just sew a piece of felt along the top, but I knew I wanted really thick woolly hair.  As it turned out, doing the hair was lots of fun too, and I enjoyed every minute!  I sewed strands of wool, two at a time, all over her scalp, so there is actually complete coverage of her scalp.  I know from when I played with dolls as a child, my favourite dolls had complete hair coverage so that I could leave out or put up into pigtails or a pony tail, or do plaits… whatever I wanted.  Even though I’m probably past the age of wanting to do my doll’s hair – or maybe NOT?!  Anyway I still wanted proper hair.  I absolutely love her wild shaggy mane of hair and decided to leave it untrimmed and just as is.

this first picture is the closest match to her actual hair colour

IMG_8771 DSC_2630

She has:

a summer wardrobe, comprising knickerbockers, a sundress, a pompom necklace, and a newspaper hat,

and; a winter wardrobe, comprising a long sleeved dress, an overcoat and a beanie.  She also has an apron, for housework, and a little tote bag.  A tote bag!  eeeee the cuteness!

DSC_2639

 

This whole project was heaps of fun.  I know I keep repeating that, but honestly, the whole time I was playing about with this I just kept thinking “Omigod, so. Much. Fun!” you know, one of those projects where you cannot bear to put it down but you just want to keep doing a little bit more.  Then a little bit more.  Some, if not most of her clothes took a mere handful of minutes each; SO zippy and super super easy.  And fun.  Did I mention it was fun?

yup, she’s standing in a soup ladle.  She has trouble standing up by herself

DSC_2665

My materials; Sally herself is unbleached calico, stuffed with Australian-made Hobby-fill from Spotlight, pom pom for her necklace also from Spotlight.  Hair is Morris Empire Superwash merino 4ply, in colour 441, Rust Twist, from my sock wool stash.  Fabric for clothing; a bundle of fat quarters from Calico and Ivy, the ribbon for the tote bag handle was cut from the ribbon holding the fat quarters together.  Also some scrap ribbons, yarn, embroidery thread, button, and other small bits and bobs from my stash.

DSC_2659

My only slight regret is that the ends of the embroidery yarns show up a little bit behind her face… I tried to hide them in the stuffing as I went but evidently my calico is wide-weave and a little see-through, and as I stuffed her head, compressing the stuffing has forced the thread ends forward a bit.  Well, we live and learn, I’ll know to be more careful about this next time.

don’t want to wear your beanie, Sally? Just stuff it in your TOTE BAG!

DSC_2663Quickie review:

The Making of a Rag Doll, Jess Brown

Hardcover book, 136 pages, high quality paper, beautifully photographed and all over a very attractive presentation.  Would be equally nice as a coffee table book actually!

The book contains patterns and full instructions for making the 41cm doll, plus clothing and accessories; knickerbockers, a sundress, overcoat, long-sleeved dress, beanie, apron, tote bag, quilt and a newspaper hat.

The patterns are full size, printed on both sides of two sheets of sturdy thick brown paper, kept in a slotted page in the back of the book, and are clear and easy to trace.

Contents; introduction is a nice summary of the author’s journey in doll making, then the next 20 pages or so are devoted to explanation of basic sewing terms and notes on sourcing supplies of fabric, haberdashery and sewing tools. All the explanations are extremely detailed, starting from the absolute basics and aimed at the complete beginner to sewing.  As in this could be an excellent first sewing gift for a child.  Instructions are exhaustively thorough, well laid out, and most are also accompanied by simple illustrations.  All measurements are helpfully given in both imperial and metric.

Summary; excellent for a beginner to sewing, but really anyone could enjoy this book too, I certainly did!  I was initially attracted to it because of the cuteness of the doll and her clothes and found it all to be a super easy as well as an incredibly fun project.  Highly recommended!

pinterestmail

village dress, for Cassie

DSC_2731It’s taken a while but I’ve finally taken pictures of Cassie wearing the dress I made for her for Christmas!IMG_7763

The fabric is a crepe printed with Cinqueterre-like, or Amalfi-coast-like villages, and we both loved it upon first sight.  I knew at once it would be perfect for her, and make a fun little dress for her to wear to work.  See, she works in an office, but it is a creative field, and apparently most of her female colleagues dress quite fun and funky, more arty than corporate.  And previously she had mentioned in a slightly wistful tone that she was the most conservative dresser in her office.
My Christmas pressie radar immediately perked up.

O reaaaaaally!!!

Fortunately for her, she has a mother who will pick up on even the vaguest of  vague-hints, well, when they’re sewing related that is, not so much other stuff that is.. um, less sewing-related ahem.   Anyway, I’m launching the fun-and-funky-wardrobe goal right here and now.   I sneakily snuck back to Fabulous Fabrics on my own and deviously bought some of the village print… mwahahaha.

DSC_2703btw, it’s faaaaaaar harder to hide Christmas sewing from Cassie than it is the boys! who pay precisely zero attention to whatever I’m mucking about with in the laundry… Cassie is a high probability to go snooping around the stash to periodically pet the fabrics and select stuff for herself.  I had to be SUPER devious to get this made without her twigging as to what was going on… and she was completely surprised!  Yay!!!

IMG_7762

For a pattern, I chose Burdastyle magazine 02/2015, number 107, a little loose, raglan-sleeved, gathered into the neckline, tunic style of dress.  It has inseam side pockets and an elasticised waist that sits up on the hips, allowing extra length above to loosely blouse out over it.  The dress looks adorable when worn by a person, but unfortunately I think it comes across as kind of dumpy on a dummy and, dare I say it, positively heinous on the hanger… prime reason why I decided to wait until she could model it for me herself!  In the meantime it has been a great success; having been washed and worn enthusiastically to work several times already.  There is no greater compliment…!

IMG_7761IMG_7769

The print was aligned crosswise and I laid down the pieces that way too, to have the houses “upright” in the dress.  I found 2m of 150cm wide fabric to be sufficient.  My fabric is quite see-through, so I lined it with ivory poly-crepe, the same fabric I used for my ivory Ruby slip… and I made the necktie in ivory as well.  Actually I first made the necktie in the village-y print but it looked way too busy and a little overpowering so I made another one in ivory and it looks about a thousand times better.  I suggested getting black fabric and making it in black instead but she likes the ivory.

IMG_7772IMG_7760

I have some thoughts on the pattern construction too… skip this bit if you’re not making the pattern since it’s not going to make any sense otherwise…

DSC_2630Although it looks short on the model in the magazine, it didn’t look that short when made up so I removed about 9cm off the bottom to get the same look.   Sleeves are about 2cm shorter.

The way they’re written; the instructions are a touch confusing  since for much of it you’re bouncing back and forth between different construction notes, for style 105 and 106, and to complicate things the neckband of style 105 is very different from that of 107, since it has a collar whereas 107 is collar-less!  and there’s zero mention of the collar-less version in the instructions…  so you sort of have to work it out alone.  I attached the folded neckband to the neckline in one pass, gathered it up inside the seam allowance a little, then overlocked the raw edges along the gathering inside.  This helps pull the neckline in a little tighter, and the necktie does the rest of the work in gathering up that wide neckline.

With the pockets, the instructions have you stitch up the side seams, THEN insert the pockets… well I always do it the other way around, so it was kind of a whaaat? moment for me.  Anyway, gave it a whirl.  It works fine, of course… just thought I’d mention it because it was different…  🙂

I made a size 36, Cassie’s usual size, but in the course of making it I tried it on a  few times, just to check various bits and pieces, and found it worked perfectly well on me too, a size 38. Something to keep in mind if you’re a larger size but only have enough fabric for a smaller size!

Anyway whatever; she loves it, I love it on her I think she looks adorable in it, so the final verdict; a great success!

DSC_2705

Details:

Dress; Burdastyle magazine 02/2015-107 also available here, crepe
Sandals; Sportscraft, mine! I’ve had these for about 10 years or so

DSC_2740

pinterestmail
Switch to mobile version
↓